Connexx ConnexxAir User Manual - Status Leds
21
Draft | english | 2016-12-13
Important information
This device is intended to program hearing instruments
wirelessly.
Status LEDs
The middle LED indicates the power status
and the status of the wireless connection:
Battery is low
Charging
Battery is fully charged
(only when ConnexxAir is in charging cradle)
Flashing slowly (once every 3 seconds)
Programming connection is not established
Data transfer between ConnexxAir and hearing
instruments is not possible.
Flashing quickly (once per second):
Programming connection is established
Data transfer between ConnexxAir and hearing
instruments is possible.
The left and right LEDs blink at data rate,
while data is transferred to the respective hearing
instrument.
When all three LEDs are flashing green from
left to right, ConnexxAir is searching for a dongle (pairing
mode).