D'Alessandro Termomeccanica CSL100 Use And Maintenance Manual - page 3
3
0.7 Proper use
www.recal.cl ·
bio@recal.cl ·
(+562) 2430 7700
0 – GENERAL INFORMATION
0.1 Identification of the document
This instruction manual, carried out by D'Alessandro Termomeccanica, is an integral part of the
machine. The reproduction of any part of this manual, in any form, is strictly forbidden.
0.2 Aim of the document
The aim of this manual is to allow the machine users to employ it in the better conditions of
safety for people, animals and things.
0.3 Referring Standards
The manual is carried out according to the following Directives, Laws and Standards:
1. European Directive EEC 92/59 about the product general safety
2. Technical regulation UNI EN 292/1 e 292/2 about the safety of machinery (Principles)
3. Technical regulation UNI EN 563 about the safety of machinery (Temperature of the
contact surfaces)
4. Technical Normative A.N.C.C. collection R/1978 (D.M. 01/012/1975)
0.4 Identification of the manufacturer
The identification of the company D'Alessandro Termomeccanica as Manufacturer is indicated,
according to what is written in the Directive 98/37 EEC, by means of the following acts:
a) Declaration of conformity
b) CE Mark
c) Use and maintenance manual
The legal name of the manufacturer is:
D'Alessandro Termomeccanica - C.da Cerreto 55/B
66016 Miglianico (CH) - Italy
It can be read on the metallic plate on the machine with the mark
0.5 Machine identification
The plate located on the machine shows:
¨ The year of manufacture
¨ The serial number
0.6 Mark
The plate with the legal name of the manufacturer, the identification data of the machine, the
EC mark and the declaration of conformity enclosed certify that the machine complies with the
Machine Directive.
The machine is a heat generator for the production of low pressure hot water
suitable for solid fuel combustion with manual feeding.
Any other use is improper.