D'Alessandro Termomeccanica CSL100 Use And Maintenance Manual - page 9
9
THERMO-
HYDROMETER
REARMAMENT
THERMOSTAT
GENERAL
SWITCH
THERMOSTAT
www.recal.cl ·
bio@recal.cl ·
(+562) 2430 7700
5 – STARTING
5.1 Checks before the starting
Before starting the heat generator check that:
• The installer delivered the formal Declaration of
Conformity.
• The water supply is regularly filled with the right water
level in the open expansion tank.
• The open expansion vessel be supplied by means of a
cock with float to ensure the constant water level and
the cock be provide with anti-calcareous device.
• The circulation pump work regularly ensuring the
reduction of the water temperature in the boiler in case
of overheating.
5.2 Starting
After performing the checks described at point 5.1 it is possible to start the heat generator.
The operations to be performed are the following:
1. Open the firebox door [6]
2. Light the fuel by means of commercial products used to light the wood into the fireplaces
and close the firebox door.
3. Wait that the fuel lights regularly.
4. Close the firebox door [6]
5.3 Machine in operation
After the starting the heat generator working is regulated by the draught regulator.