D'Alessandro Termomeccanica CSL100 Use And Maintenance Manual - page 5
5
crushing
fire
High
temperature
www.recal.cl ·
bio@recal.cl ·
(+562) 2430 7700
1 - SAFETY and RESIDUAL RISKS
1.0 Risks connected to the use of the machine
The machine is built according to the essential safety requirements required by the European
Directives.
The European and National Standards concerning the safety of this type of machine have been
considered during the planning.
Conditions of danger can rise in case:
1) The machine is used improperly.
2) The machine is installed by unskilled staff.
3) The instructions of safety use contained in this manual are not observed.
1.1 Residual risks
The machine has been conceived, planned and built according to all the Safety Standards.
Although any possible reason of risk has been considered it is possible that besides the risks
deriving from improper use also the following ones may be risen:
Risks of BURNS during the lighting of the firebox
and /or the access to the inspection and cleaning doors
with firebox lighted or not completely extinguished.
Risk of FINGER LESIONS during the opening
operations for the cleaning and/or maintenance of the
feeding screw.
We recommend using proper Individual Safety
Devices (gloves).
Risk of ASPHYXIA in case of insufficient suction of fumes (draught). We
recommend cleaning periodically the fume and firebox ducts.
After putting the combustibles into the machine, the doors of the combustion
chamber must be closed.