D-ILA D-ILA 1080MF1 Installation And Operation Manual - page 26
2
3 Options Menu
Menu Display
Adjuststhedisplaydurationofthemenu
screen.
Setting Values: 1sec, On
Default Value: 1sec
• Themenuscreendisplaywillnotdisappearau-
tomaticallywhenthisissettoOn.Instead,press
theEXITbuttontoclearthemenuscreen.
Sleep Time
Setsthelengthoftimeaftercessationofvideo
inputbeforeautomaticallyswitchingtheunit
tothestandbymode
Setting Values (min): 1, 0, 0, Off
Default Value: Off
RC232C (bps)
Setsthedataratewhencommunicatingvia
theRS-232Cport.Ensurethatthisisthesame
astheratesetatthedeviceattheotherend.
Setting Values: 00, 1200
Default Value: 1200
Zoom/Focus
Locks/Unlocksthepowerzoom/powerfocus
functionsoftheprojectionlens.
Setting Values: Lock, Unlock
Default Value: Unlock
Power Save
Lowersthepower(brightness)ofthelamp.
Setting Values: On, Off
Default Value: Off
• Loweringthebrightnessofthelamp(Power
SaveOn)willsavepower,butneedlesstosay
theimagewillnotbeasbright.
• Adjustmentofsettingswillbedisabledfor
about1minuteafterthesettingischanged.
Waitaminutebeforetryingtomakefurther
adjustments.
• AlteringthePowerSavesettingdoesnotaffect
thelampusagetime(lamplife)ofthelight-
source.
4 Information Menu
• Optionsunderthismenushowinformation
only:nosettingsareavailable.
Lamp Time
Displaystheaccumulatedhoursofusageof
thelight-sourcelamp.
Source
Automaticallyidentifiestheinputvideosignal
attheprojector’sDVIinput,anddisplaysthe
signalname(‘1080p50’or‘1080p60’).
• Nosignalnamewillbedisplayedifnosignalis
present,orifthesignalisnotoneoftheabove
types(‘Outofrange’willbedisplayedinthelat-
tercase).
NOTES:
• Whentheinputvideosignalisswitched,ablue
screenwillappearforabout2seconds.
• Whennothingisconnectedtothe[DVI]termi-
nal,orifthereisnovideosignal,a‘NoSignal
DVI-D’messagewillbeprojected.
• Inthecaseofavideosignalthatcannotbeused
withthisunit,an‘OutofRange’messagewill
beprojected.
• Videoinputsignalsthatcanbeusedwiththis
unitare1080/50pand1080/60psignalsviathe
DVI-Dinput.