D-ILA D-ILA 1080MF1 Installation And Operation Manual - page 31
1
4 Reinstall the inner filter
• Checkthatthe2clipsattheleftandrightof
theinnerfilterarelockedtothebodyofthe
projector.
CAUTION:
• Ifyouareusingadetergenttocleanthefilter,
werecommendwearingrubbergloves.
• Aftercleaningthefilter,donotreinstallituntil
itisperfectlydry.Otherwise,electricshocksor
malfunctionsmayoccur.
• Donotcleanthefilterwithavacuumcleaner.
Thefilterelementissoftandmaybedamaged
bythesuction.
On-screen warning messages
What the messages mean
‘No Signal DVI-D’
NodeviceisconnectedtotheDVIinterface.
TheDVI-DcableisconnectedtotheDVItermi-
nalbutthereisnosignalinput.
‘Out Of Range’
Avideosignalthatcannotbeusedwiththis
unithasbeeninput.Theprojectoronlyaccepts
1080/50por1080/60pvideosignals.
A representation of a lens is shown
with an ‘X’ through it and the words,
‘not available’
ShownwhenpressingtheZOOMT/WorFO-
CUS+/-buttonwhenthe‘Zoom/Focus’setting
inthe‘Options’menuissetto‘Lock’.
• Gotothe‘Options’menuandset‘Zoom/Focus’
to‘Unlock’.
‘Lamp replacement’
Assoonastheaccumulatedlamptimereaches
1900hours,a‘Lampreplacement’messageis
displayed.Inaddition,whentheaccumulated
lamptimereachesbetween1900hoursto
2000hours,the‘Lampreplacement’message
willbedisplayedeachtimetheprojectoris
turnedon.
• Themessagecanbeclearedbypressingany
buttonontheremotecontrolorthisunit.
Get a new lamp unit ready in advance or
replace as soon as possible.
‘Lamp replacement Warning’
The‘Lampreplacement’messagewillbedis-
playedandthe‘Warning’wordappearsblink-
ingbeneathwhentheaccumulatedlamptime
exceeds2000hours.
• Themessagecanbeclearedbypressingthe
EXITbutton.However,thesamemessagewill
reappeareveryhour.
Whentheaccumulatedlamptimeexceeds
2000hours,theprojectorcannotbeturned
onagainonceitisswitchedtothestandby
modeorturnedoff.Ifcontinuousprojectionis
performedafter2000hours,theunitwillshut
downuponexceeding2010hoursandprojec-
tionwillbedisabled.
Install a new lamp unit and reset the lamp
time.