D-Link DAP-1150 Quick Installation Manual - Configuring Access Point
Other manuals for DAP-1150:
User Manual, Quick Installation Manual, Quick Installation Manual, User Manual, User Manual, Quick Installation Manual, Quick Installation Manual
Manual is about: Wireless Access Point Supporting Router Mode
of
14
DAP-1150
Quick Installation Guide
CONFIGURING ACCESS POINT
Connecting to Web-based Interface
1. Start a web browser.
2. In the address bar of the web browser, enter the IP address of the access
point (by default, the following IP address is specified:
192.168.0.50). Press the Enter key.
3. On the opened page, enter the username (login) and password for the
administrator account (by default, the following username and password
are specified: admin, admin). Then click the Enter button.
!
If the error “
The page cannot be displayed
” (or “
Unable to display the
page
”/“
Could not connect to remote server
”) occurs upon connecting to
the web-based interface of the access point, make sure that you have
properly connected the device to your computer.
6