1. DL manuals
  2. D-Link
  3. Webcam
  4. DCS-932L
  5. How To Connect

D-Link DCS-932L How To Connect

Manual is about: Wireless N Day/Night Home Network Camera

Summary of DCS-932L

  • Page 1

    D-link technical support – how to connect the dcs-932l wirelessly. Page 1 of 7 how to connect the dcs-932l wirelessly this document will detail how to change the dcs-932l configuration to be connecting wirelessly to your wireless access point, without having to run through the setup utility again. E...

  • Page 2

    D-link technical support – how to connect the dcs-932l wirelessly. Page 2 of 7 it is assumed that you have followed the setup guide "how to install the dcs-932l" and during the installation you selected the "wired" configuration. It's therefore assumed that your dcs-932l is connected using an ethern...

  • Page 3

    D-link technical support – how to connect the dcs-932l wirelessly. Page 3 of 7 2. Now we know the assigned ip address, please type your ip address into your internet browser, then press enter or go: 3. You will need to login with your username and password that you assigned to your dcs-932l during t...

  • Page 4

    D-link technical support – how to connect the dcs-932l wirelessly. Page 4 of 7 4. When you have successfully accessed the dcs-932l web configuration you will see a similar illustration on your internet browser as the below illustration: note: your live video results may differ. 5. Click on the setup...

  • Page 5

    D-link technical support – how to connect the dcs-932l wirelessly. Page 5 of 7 6. Click on the enable option, then click on the save settings button: 7. Now click on the site survey button:.

  • Page 6

    D-link technical support – how to connect the dcs-932l wirelessly. Page 6 of 7 8. Select your ssid (wireless name): 9. Scroll down (if required) and press the select option:.

  • Page 7

    D-link technical support – how to connect the dcs-932l wirelessly. Page 7 of 7 10. Now type in your correct wireless password into the pre-shared key field, then press the save settings button: 11. Now remove the ethernet cable from the dcs-932l. Note: when you disconnect the ethernet cable the powe...