D-link technical support – how to install the dcs-932l. Page 1 of 16 how to install the dcs-932l this document will detail how to install the dcs-932l into your existing network. Ensuring the firmware remains up to date can assist with functionality / improved performances as well as adding addition...
D-link technical support – how to install the dcs-932l. Page 2 of 16 1. Connect the included ethernet cable to the network cable connector located on the top panel at the rear of the dcs-932l and attach the other end to your network, the network will usually be a lan port on your router. Ensure to a...
D-link technical support – how to install the dcs-932l. Page 3 of 16 4. The activex install routine will be checked and or installed for the dcs-932l to run correctly: 5. The network connection present on the dcs-932l will also be checked to ensure on a successful setup:.
D-link technical support – how to install the dcs-932l. Page 4 of 16 6. Under the wps button screen leave the default option and click next: 7. Using the collar (stand) position the dcs-932l for the viewing position that you require. Click the next button:.
D-link technical support – how to install the dcs-932l. Page 5 of 16 8. This step should already be completed, under step 1. Click the next button: note: you may click on the hyperlink to provide you with a basic overview of your devices connected together. Below is that illustration:.
D-link technical support – how to install the dcs-932l. Page 6 of 16 9. The power led at the back of the dcs-932l should be green, click the next button (provided your power led is green as well): 10. You must click 'allow access' to the following prompt:.
D-link technical support – how to install the dcs-932l. Page 7 of 16 11. Click the yes button to the below illustration: 12. Please patiently wait for the setup utility to detect your dcs-932l:.
D-link technical support – how to install the dcs-932l. Page 8 of 16 13. Once your dcs-932l has been found, click the next button: note: if your dcs-932l is unable to be found this can be the cause of an installed firewall/antivirus application and or a custom configuration change to the operating s...
D-link technical support – how to install the dcs-932l. Page 9 of 16 15. Patiently wait for the dcs-932l to update it's configuration: 16. Under the wired or wireless screen you have the option to select the wired or wireless option for the connection of your dcs-932l. Select the heading which match...
D-link technical support – how to install the dcs-932l. Page 10 of 16 wireless connection: 16c. Select the wireless option: note: the setup utility will automatically search for nearby wireless ssid's, however you may also click on the 'rescan' button as well. 16d. Using the dropdown arrow button fo...
D-link technical support – how to install the dcs-932l. Page 11 of 16 16e. Please type in your wireless password into the key / password field and also into the retype your key / password field, then click next: 16f. Patiently wait for the changes to be saved:.
D-link technical support – how to install the dcs-932l. Page 12 of 16 16g. Patiently wait for the restarting process to complete. 17. Unplug the ethernet cable from the back of your camera. Patiently wait an additional 60 seconds, then click on the continue button: note: when disconnecting the ether...
D-link technical support – how to install the dcs-932l. Page 13 of 16 18. Patiently wait for the dcs-932l to restart and update its device information: 19. It is likely that you don't already have a mydlink account, so let's create one (if you already have a mydlink account, refer to step 19a): you ...
D-link technical support – how to install the dcs-932l. Page 14 of 16 19a. If you already have a mydlink account, select 'yes, i already have a mydlink account' and fill out the below requirement. Then click next: note: jump to step 22 if you selected "yes, i already have a mydlink account". 20. You...
D-link technical support – how to install the dcs-932l. Page 15 of 16 21. An email will be sent to the email address which you specified. You will need to check your email inbox and click on the activation link to finish activating your mydlink account, then click on the ok button: 22. Patiently wai...
D-link technical support – how to install the dcs-932l. Page 16 of 16 23. Your dcs-932l setup is now complete. Click on the finish button. 24. You have the option to visit mydlink now and login to view your dcs-932l, or at a later time: 25. Installation is now complete. You may login to your mydlink...
