D-Link DES-3528 - xStack Switch - Stackable Hardware Installation Manual - Web Pages
xStack
®
DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide
NOTICE: Any changes made to the Switch configuration during the current
session must be saved in the Save Changes Web menu (explained below)
or use the command line interface (CLI) command save.
Web Pages
When you connect to the management mode of the Switch with a Web browser, a login window is displayed. Enter a
user name and password to access the Switch's management mode.
Below is a list and description of the main folders available in the Web interface:
System Configuration – System Information Settings, Dual Configuration Settings, Firmware Information Settings,
Port Configuration, Port Settings, Port Description Settings, Port Error Disabled, Jumbo Frame Settings, PoE, PoE
System Settings, PoE Port Settings, Serial Port Settings, System Log Configuration, System Log Settings, System
Log Server Settings, System Log, System Log & Trap Settings, System Severity Settings, Time Range Settings,
Time Settings, User Accounts Settings, Stacking, Stacking Device Table, and Stacking Mode Settings.
Management – ARP, Static ARP Settings, Proxy ARP Settings, ARP Table, Gratuitous ARP, Gratuitous ARP
Global Settings, Gratuitous ARP Settings, IPv6 Neighbor Settings, IP Interface, System IP Address Settings,
Interface Settings, Management Settings, Session Table, Single IP Management, Single IP Settings, SNMP
Settings, SNMP Global Settings, SNMP Traps Settings, SNMP Linkchange Traps Settings, SNMP View Table
Settings, SNMP Community Table Settings, SNMP Group Table Settings, SNMP Engine ID Settings, SNMP User
Table Settings, SNMP Host Table Settings, SNMP v6Host Table Settings, RMON Settings, Telnet Setings, and Web
Settings.
L2 Features – VLAN, 802.1Q VLAN Settings, 802.1v Protocol VLAN, 802.1v Protocol Group Settings, 802.1v
Protocol VLAN Settings, Asymmetric VLAN Settings, GVRP, GVRP Global Settings, GVRP Port Settings, MAC-
based VLAN Settings, PVID Auto Assign Settings, Subnet VLAN, Subnet VLAN Settings, VLAN Precedence
Settings, VLAN Counter Settings, Voice VLAN, Voice VLAN Global Settings, Voice VLAN Port Settings, Voice VLAN
OUI Settings, Voice VLAN Device, VLAN Trunk Settings, Browse VLAN, Show VLAN Ports, Q-in-Q, Q-in-Q
Settings, VLAN Translation Settings, Layer 2 Protocol Tunneling Settings, Spanning Tree, STP Bridge Global
Settings, STP Port Settings, MST Configuration Identification, STP Instance Settings, MSTP Port Information, Link
Aggregation, Port Trunking Settings, LACP Port Settings, FDB, Static FDB Settings, Unicast Static FDB Settings,
Multicast Static FDB Settings, MAC Notification Settings, MAC Address Aging Time Settings, MAC Address Table,
ARP & FDB Table, L2 Multicast Control, IGMP Snooping, IGMP Snooping Settings, IGMP Snooping Rate Limit
Settings, IGMP Snooping Static Group Settings, IGMP Router Port, IGMP Snooping Group, IGMP Snooping
Forwarding Table, IGMP Snooping Counter, CPU Filter L3 Control Packet Settings, MLD Snooping, MLD Snooping
Settings, MLD Snooping Rate Limit Settings, MLD Snooping Static Group Settings, MLD Router Port, MLD
Snooping Group, MLD Snooping Forwarding Table, MLD Snooping Counter, Multicast VLAN, IGMP Multicast Group
Profile Settings, IGMP Snooping Multicast VLAN Settings, MLD Multicast Group Profile Settings, MLD Snooping
Multicast VLAN Settings, Multicast Filtering, IPv4 Multicast Profile Settings, IPv4 Limited Multicast Range Settings,
IPv4 Max Multicast Group Settings, Multicast Filtering Mode, ERPS Settings, LLDP, LLDP Global Settings, LLDP
Port Settings, LLDP Management Address List, LLDP Basic TLVs Settings, LLDP Dot1 TLVs Settings, LLDP Dot3
TLVs Settings, LLDP Statistics System, LLDP Local Port Information, and LLDP Remote Port Information.
L3 Features – Local Route Settings, IPv4 Static/Default Route Settings, IPv4 Route Table, IPv6 Static/Default
Route Settings, IPv6 Route Table, Policy Route Settings, and IP Forwarding Table.
QoS – 802.1p Settings, 802.1p Default Priority Settings, 802.1p User Priority Settings, 802.1p Map Settings,
Bandwidth Control, Bandwidth Control Settings, Queue Bandwidth Control Settings, Traffic Control Settings, DSCP,
DSCP Trust Settings, DSCP Map Settings, HOL Blocked Prevention, Scheduling Settings, QoS Scheduling, QoS
Scheduling Mechanism, SRED, SRED Settings, and SRED Drop Counter.
ACL – ACL Configuration Wizard, Access Profile List, CPU Access Profile List, ACL Finder, and ACL Flow Meter.
Security – 802.1X, 802.1X Global Settings, 802.1X Port Settings, 802.1X User Settings, Guest VLAN Settings,
RADIUS, Authentication RADIUS Server Settings, RADIUS Accounting Settings, RADIUS Authentication, RADIUS
Account Client, IP-MAC-Port Binding (IMPB), IMPB Global Settings, IMPB Port Settings, IMPB Entry Settings, MAC
Block List, DHCP Snooping, DHCP Snooping Maximum Entry Settings, DHCP Snooping Entry, ND Snoop, ND
Snoop Maximum Entry Settings, ND Snoop Entry, MAC-based Access Control (MAC), MAC-based Access Control
Settings, MAC-based Access Control Local Settings, MAC-based Access Control Authentication State, Web-based
Access Control (WAC), WAC Global Settings, WAC User Settings, WAC Port Settings, WAC Authentication State,
Japanese Web-based Access Control (JWAC), JWAC Global Settings, JWAC Port Settings, JWAC User Settings,
JWAC Authentication State, JWAC Customize Page Language, JWAC Customize Page, Compound Authentication,
25