D-Link DES-3528 - xStack Switch - Stackable Hardware Installation Manual - page 35
xStack
®
DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide
Compound Authentication Settings, Compound Authentication Guest VLAN Settings, Port Security, Port Security
Settings, Port Security VLAN Settings, Port Security Entries, ARP Spoofing Prevention Settings, BPDU Attack
Protection, Loopback Detection Settings, Traffic Segmentation Settings, NetBIOS Filtering Settings, DHCP Server
Screening, DHCP Server Screening Port Settings, DHCP Offer Permit Entry Settings, Access Authentication
Control, Enable Admin, Authentication Policy Settings, Application Authentication Settings, Authentication Server
Group Settings, Authenticaton Server Settings, Login Method Lists Settings, Enable Method Lists Settings, Local
Enable Password Settings, SSL Settings, SSH, SSH Settings, SSH Authentication Method and Algorithm Settings,
SSH User Authentication List, Trusted Host Settings, and Safeguard Engine Settings.
Network Application – DHCP, DHCP Relay, DHCP Relay Global Settings, DHCP Relay Interface Settings, DHCP
Relay VLAN Settings, DHCP Relay Option 60 Server Settings, DHCP Relay Option 60 Settings, DHCP Relay
Option 61 Settings, DHCP Server, DHCP Server Global Settings, DHCP Server Exclude Address Settings, DHCp
Server Pool Settings, DHCP Server Manual Binding, DHCP Server Dynamic Binding, DHCP Conflict IP, DHCPv6
Relay, DHCPv6 Relay Global Settings, DHCPv6 Relay Settings, DHCP Local Relay Settings, DNS, DNS Relay,
DNS Relay Global Settings, DNS Relay Static Settings, PPPoE Circuit ID Insertion Settings, SNTP, SNTP Settings,
and Time Zone Settings.
OAM – CFM, CFM Settings, CFM Port Setings, CFM Loopback Settings, CFM Linktrace Settings, CFM Packet
Counter, CFM Fault Table, CFM MP Tabler, Ethernet OAM, Ethernet OAM Settings, Ethernet OAM Configuration
Settings, Ethernet OAM Event Log, Ethernet OAM Statistics, DULD Settings, Cable Diagnostics, .
Monitoring – Utilization, CPU Utilization, DRAM & Flash Utilization, Port Utilization, Statistics, Port Statistics,
Packets, Received (RX), UMB_cast (RX), Transmitted (TX), Errors, Received (RX), Transmitted (TX), Packet Size,
VLAN Counter Statistics, Mirror, Port Mirror Settings, RSPAN Settings, sFlow, sFlow Global Settings, sFlow
Analyzer Server Settings, sFlow Flow Sampler Settings, sFlow Counter Poller Settings, Ping Test, Trace Route,
Peripheral, and Device Status.
NOTE: Be sure to configure the user name and password in the User
Accounts window before connecting the Switch to the greater network.
26