D-Link DG-102SH User Manual - page 15
DG-102SH VoIP Station Gateway
9
♦
Gatekeeper Mode Use the
(restarted). Choices include:
Auto Discovery – When Auto Discovery is chosen, the VoIP gateway will auto-search the Gatekeeper
from your LAN or WAN.
Manual Discovery – When Manual Discovery is chosen, the VoIP gateway will attempt to obtain the
Gatekeeper settings from the fields located just below.
No Gatekeeper – When No Gatekeeper is chosen, the VoIP gateway will not need Gatekeeper.
♦
Gatekeeper IP Enter an IP address for the Gatekeeper.
♦
BOOTP Use the
settings once it is rebooted (restarted). Choices include:
Manual – When Manual is chosen, the VoIP gateway will obtain its IP settings from the fields located
just below.
BOOTP – When BOOTP is chosen, the VoIP gateway will attempt to obtain its IP settings from a
BOOTP server located on your LAN.
DHCP – When DHCP is chosen, the VoIP gateway will attempt to obtain its IP settings from a DHCP
server located on your LAN.
♦
IP Address Enter an IP address for the VoIP gateway.
♦
Subnet Mask Enter a subnet mask for the VoIP gateway.
♦
Default Gateway Enter the IP address of the WAN device (usually a router) you are using to make the
WAN connection.
After you have finished, press
Menu. Position the cursor over the Save Changes item and press
so they will still be present after powering off or restarting the device. Position the cursor over the Restart System
item and press