D-Link DG-102SH User Manual - page 25

DG-102SH VoIP Station Gateway 

19 

so they will still be present after powering off or restarting the device. Make sure the Reset button on the rear 

panel of the device is in the down position. Position the cursor over the Restart System item and press  for 

the changes to take effect. Your VoIP is now configured for use. 

This screen allows you to set an SNMP trap manager. 

*

""!+

♦ 

SNMP AuthTrap  Enables or disables the SNMP trap function. 

♦ 

Community  Enter the community name of the trap manager. 

♦ 

IP  Enter the IP address of the trap manager. 

This screen displays various types of information about the DG-102SH as well as allowing you to enter 

information pertaining to name, location, and how to reach the person responsible for maintaining the device. 

Use the  keys to highlight the second menu item on the Boot Menu, Device Information, and press . 

The Device Information screen will be displayed: