D-Link DG-102SH User Manual - page 28
DG-102SH VoIP Station Gateway
22
After the settings have been saved to NV-RAM, they will become the default settings for the device, and they will
be used every time it is powered on, reset or rebooted. The only exception to this is a factory reset, which will clear
all settings and restore them to their initial values, which were present when the device was purchased.
"
Before performing a Factory Reset, be absolutely certain that this is what you want to do. Once the reset is done,
all of the device’s settings stored in NV-RAM will be erased and restored to values present when the device was
purchased.
Note:After performing the Factory Reset, make sure to redefine the IP settings for the device in the IP
Configuration menu. Then perform a Restart System on the device. After these three procedures are
performed, your Factory Reset is complete.
To perform a Factory Reset, use the
Reset, and press