D-Link DGS-3224TGR - Switch User Manual - Management

DGS-3224TGR Gigabit Ethernet Switch User’s Guide 

2 

Management 

•  RS-232 console port for out-of-band network management via a console terminal. 

•  Spanning Tree Algorithm Protocol for creation of alternative backup paths and prevention of network loops. 

•  SNMP V.1, V2c1, and V3 network management, 4 groups of RMON.  

•  Flash memory for software upgrades. This can be done in-band via TFTP or out-of-band via the console. 

•  Built-in SNMP management:  

  Bridge MIB (RFC 1493) 

  MIB-II (RFC 1213) 

  802.1P/Q MIB (RFC 2674) 

  Interface MIB (RFC 2233) 

  Ethernet-like MIB (RFC 1643) 

  Mini-RMON MIB (RFC 1757) – 4 groups. The RMON specification defines the counters for the receive 

functions only. However, the DGS-3224TGR provides counters for both receive and transmit functions. 

•  Supports Web-based management. 

•  TFTP support. 

•  BOOTP support. 

•  DHCP Client support. 

•  Password enabled. 

•  Telnet remote control console. 

•  Broadcast storm control. 

•  Multicast storm control. 

•  Command Line Interface support. 

•  Port security support. 

•  TACACS and TACACS+ protocol support. 

•  SYSLOG support. 

•  Destination Lookup Fail control. 

•  SSL support. 

•  Single IP Management v1.0 support.