D-Link DGS-3224TGR - Switch User Manual - Stp Port Settings

DGS-3224TGR Gigabit Ethernet Switch User’s Guide 

64 

Priority (0-61440) <32768> 

A Bridge Priority can be from 0 to 61440. Zero is equal to the highest Bridge 

Priority. 

STP Version 

Choose RSTP (default) or STP compatible. Both versions use STP parameters 

in the same way. RSTP is fully compatible with IEEE 802.1d STP and will 

function with legacy equipment. 

TX Hold Count (1-10) <3> 

This is the maximum number of Hello packets transmitted per interval. The 

count can be specified from 1 to 10. The default value is 3. 

Forwarding BPDU 

This drop-down menu allows you to configure whether to forward BPDU when 

the Spanning Tree Protocol is disabled. 

STP Port Settings 

Figure 6- 45.  STP Port Settings window 

To configure Spanning Tree Protocol functions for individual ports, enter the desired information in the fields on this 

window and then click Apply.