D-Link DP-601M User Manual - Step 8:

Internet Server User’s Guide

Quick Installation

xvii

Mandatory Settings for Internet Access

Step 8:

 ISP Account -> Phone Number,

 when you signed-up for

an account with your ISP (internet service provider), you

should have been given an access phone number that your

Internet server’s built-in modem will dial.  Look under the

“WAN Port Settings” menu for this item and enter the

phone number provided by your ISP.

Step 9:

 ISP Account -> User ID,

 your ISP should also have as-

signed a User ID (aka, a username) that you will use for

logging-in.  Also under “WAN Port Settings,” enter this user

ID exactly as it was provided to you.

Step 10:

 ISP Account -> Password,

 finally, to complete the ISP

login process, the internet server must provide the password

associated with the user ID assigned by your ISP.  Enter it.

You have now completed the basic steps necessary to install, config-

ure, and begin using the internet server.  Note that, with respect to

steps 8–10, it may be necessary for you to use a  “Login Script”  in-

stead.  If you enter the information required in those three settings

correctly and still have trouble logging-in, see the  “Login Script”

section on page 24 to create a login script.