D-Link DP-601M User Manual - Routing Table

Internet Server User’s Guide

Configuration Settings

43

In normal operation (when scheduling is disabled) the

internet server will always dial out when it receives a data

packet destined for the internet, and will hang up when the

idle time condition in the System Configuration menu is

met. However, when scheduling is enabled, the internet

server will maintain the WAN connection according to

these parameters:

•

Auto Dial

  – Causes the internet server to

automatically dial out when a scheduled time

occurs. If the internet server is scheduled to op-

erate between 9:00 am and 17:00 pm on

Mondays, then at 9:00 am Monday morning the

internet server will dial out regardless of

whether it receives a packet destined for the

internet. The connection to the internet will be

maintained until the scheduled period elapses.

•

Dial on Demand

 – Causes the internet server

to dial out when it receives a packet for the

internet, if the packet is received within the

time allowed for dialing up in the schedule ta-

ble. If a request is received to access the

internet outside of the time limits defined in the

schedule table, the internet server will not dial

out.

Routing Table

The static routing table allows the internet server to co-

exist on the same network with a router. This

implementation depends on whether the router has its own

WAN access to the internet.

If the router does not have a connection to the internet,

then you do not need to create a new IP network or IP sub-

net. You simply need to add the internet server to the

existing LAN and configure the router to use the Local