D-Link DP-601M User Manual - Isp Account -> Phone Number

Internet Server User’s Guide

22

System Setup

vided by your ISP.  (Note that without a DNS server IP,

internet sites will only be available using IP addresses and will

not be available using URLs.)

Default Value:

  0.0.0.0

Must Be User Modified?

  Yes.

Description:

  A Domain Name Service (DNS) server address is

used to translate URLs into their corresponding IP addresses.

ISP Account -> Phone Number

In order for the internet server to control the modem to dial the

phone, you must enter the dial-up phone number for your ISP.  If

you need to dial an area code in order to call the number, it must be

included in this variable.  If you must dial  “#”, 0, 9 or some other

number in order to get an outside phone connection, that information

must be included in how this variable is configured.

Options:

  For dial-up connections, the local ISP phone num-

ber, complete without spaces, hyphens or other punctuation

(except for commas which are used for a brief pause in dial-

ing).  The maximum length is 20 characters.

Example:

  Your ISP phone number is a local call to 916-5555

and you must dial 0 in order to get an outside line from the of-

fice where you want to use the internet server.  You would

enter 0,,9165555 as the  “ISP Account -> Phone Number” set-

ting.  The two commas instruct the modem to pause between

dialing the 0 and dialing the rest of the number.  This pause is

necessary if there is normally a moment or two between dial-

ing 0 and getting an outside dial tone.

Default Value:

  (none)

Must Be User Modified?

  Yes.