D-Link DP-601M User Manual - Display Current Time
Internet Server User’s Guide
46
Configuration Settings
This feature allows you to monitor traffic on the WAN
ports(s) in kbps (kilobytes per second) and as a percentage of
utilization.
♦
Display Current Time
Shows the current date and time as known by the inter-
net server. Please note that the date and time values can
only be received from the IS Manager Server.
Tools
Each of the management items listed below allows you to ‘force’
some action. Each of them prompt for confirmation before executing.
♦
Dial Up
– Dial the ISP phone access for one or the other
WAN port using the configuration stored under the WAN
port control.
♦
Hang Up
– Send the phone disconnect command string
to the modem immediately to end the current session.
♦
Reset
– Return the internet server’s settings to their
state prior to changes made this session and restart the de-
vice.
♦
Factory Reset
– Return the internet server’s settings
to their original factory values and restart the device. Note
that this will wipe out all information about how the settings
are currently configured.
♦
Adjust Time
– Choosing this option causes the internet
server to contact the IS Manager Server to receive an up-
dated time and date.