D-Link DSL-604+ User Manual - page 42
DSL-604+ ADSL Ethernet Router User’s Guide
32
Tools
Tool> Admin> Administrator Settings
There are two accounts that can access the management interface through the web browser. The account for
users is admin and the other is for root level. Admin has read/write ability on the web page and can make some
changes. You can change the Admin account password here for personal security.
Tool> Admin> Remote Management
Remote Management allows the device to be configured through the WAN (Wide Area Network) port from the
Internet using a web browser. A username and password are still required to access the browser-based
management interface.
IP Address - Enter the Internet IP address of the computer connected to the DSL-604+. If the IP address is set to
*, this allows all Internet IP addresses to access the DSL-604+.
Port - The port number is used to access the DSL-604+.
Example:
http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of the DSL-604+ and 8080 is the port used for the
Web-Management interface.
Tools> System Time
The "system time" is used by the unit to synchronize scheduling services and system logging activities. You will
need to set the time zone corresponding to your location. The time can be set manually or the device can connect
to a NTP (Network Time Protocol) server to retrieve the time.