D-Link DSL-604+ User Manual - Rear Panel Cable Connections
DSL-604+ ADSL Ethernet Router User’s Guide
ix
Power
Steady green light indicates the unit is powered on.
Status
Lights steady green during power on self-test. Once the connection status has
been settled, the light will blink green.
ADSL: Link
Steady green light indicates a valid ADSL connection. This will light after the
ADSL negotiation process has been settled.
ADSL: Act
Blinking green light indicates activity on the WAN interface.
WLAN
Blinking green light indicates activi ty on the WLAN.
Ethernet: 10M
100M
Steady green indicates a 100Mbps Fast Ethernet connection. For 10Mbps
Ethernet connection it is dark.
Ethernet: Link
Act
The rear panel of the Router provides access to the AC power adapter cord
connection as well as the port connections.
Rear Panel Cable Connections
Connect the AC power adapter cord and network cables on the rear panel. The power switch and reset button are
also located on the back of the device. Connect the antennas to the antenna posts.
ADSL (WAN Port):
Connect to ADSL line
Ethernet LAN Ports:
Connect to Ethernet LAN
Four RJ-45 crossed ports
Factory
reset
button
Antenna
post
Power
switch
Power Adapter:
Connect power here
RS-232 console port used for configuration
Antenna
post