1. DL manuals
  2. D-Link
  3. Wireless Router
  4. DSL-G604T
  5. User Manual

D-Link DSL-G604T User Manual

Manual is about: Generation II ADSL2+ Wireless Modem Router

Summary of DSL-G604T

  • Page 1

    Dsl-g604t generation ii adsl2+ wireless modem router page 1 of 110 www.Dlink.Com.Au.

  • Page 2: Table of Contents

    Dsl-g604t generation ii adsl2+ wireless modem router page 2 of 110 www.Dlink.Com.Au table of contents before you start .................................................................................... 4 installation overview ...........................................................................

  • Page 3

    Dsl-g604t generation ii adsl2+ wireless modem router page 3 of 110 www.Dlink.Com.Au dmz .................................................................................................................................................. 67 parental control ................................................

  • Page 4: Before You Start

    Dsl-g604t generation ii adsl2+ wireless modem router page 4 of 110 www.Dlink.Com.Au about this user guide this user’s guide provides instructions on how to install the dsl-g604t adsl 2+ router and use it to provide internet access for an ethernet/wireless network or single computer. If you are using...

  • Page 5

    Dsl-g604t generation ii adsl2+ wireless modem router page 5 of 110 www.Dlink.Com.Au installation notes in order to establish a connection to the internet it will be necessary to provide information to the router that will be stored in its memory. For some users, only their account information (usern...

  • Page 6

    Pa in use pas wa con vpi vci n ge 6 of 110 nformatio ername ssword an setting / nnection typ i i note th on you wi this netw serv this to lo veri pe the to t use the (co ppp brid stat rou dyn mux defa mos path iden prov rou the add sett 8 mos cha the you con inst con wind he setup wiza dsl-g604t ill...

  • Page 7

    Dsl-g604t generation ii adsl2+ wireless modem router page 7 of 110 www.Dlink.Com.Au information you will need about your dsl-g604t adsl 2+ router: username this is the username needed access the router’s management interface. When you attempt to connect to the device through a web browser you will b...

  • Page 8: Introduction

    Dsl-g604t generation ii adsl2+ wireless modem router page 8 of 110 www.Dlink.Com.Au 1 introduction this section provides a brief description of the router, its associated technologies, and a list of router features. Router description and operation the dsl-g604t wireless adsl2+ router is designed to...

  • Page 9

    Dsl-g604t generation ii adsl2+ wireless modem router page 9 of 110 www.Dlink.Com.Au router features the dsl-g604t adsl 2+ router utilises the latest adsl enhancements to provide a reliable internet portal suitable for most small to medium sized offices. Dsl-g604t advantages include: ppp (point-to-po...

  • Page 10

    Dsl-g604t generation ii adsl2+ wireless modem router page 10 of 110 www.Dlink.Com.Au 802.11g wireless in order to get the best performance from the wireless component of the router, you should have some basic understanding of how wireless networks operate. There are more factors to consider when set...

  • Page 11

    Dsl-g604t generation ii adsl2+ wireless modem router page 11 of 110 www.Dlink.Com.Au installation considerations many physical environmental factors can impact wireless networks. Radio waves are used to carry the encoded data between devices. These radio transmissions can become degraded due to sign...

  • Page 12

    Dsl-g604t generation ii adsl2+ wireless modem router page 12 of 110 www.Dlink.Com.Au front panel display place the router in a location that permits an easy view of the led indicators on the front panel. The led indicators on the front panel include power, status, adsl, wlan and ethernet. The adsl, ...

  • Page 13

    Dsl-g604t generation ii adsl2+ wireless modem router page 13 of 110 www.Dlink.Com.Au rear panel connections all cable connections to the router are made at the rear panel. Connect the power adapter here to power on the router. Use the reset button to restore the settings to the factory default value...

  • Page 14

    Dsl-g604t generation ii adsl2+ wireless modem router page 14 of 110 www.Dlink.Com.Au reset to reset the router to factory default settings including the default ip address 10.1.1.1, depress the reset button on the right side panel with a ballpoint pen, paper clip or similar object for a few seconds....

  • Page 15: Hardware Installation

    Dsl-g604t generation ii adsl2+ wireless modem router page 15 of 110 www.Dlink.Com.Au 2 hardware installation the dsl-g604t maintains two separate physical interfaces, an adsl and an ethernet interface. Place the router in a location where it can be connected to the various devices as well as to a po...

  • Page 16

    Dsl-g604t generation ii adsl2+ wireless modem router page 16 of 110 www.Dlink.Com.Au network connections network connections are provided through the adsl port and ethernet port on the back of the router. See the rear panel diagram above and the illustrations below for examples. Connect adsl line us...

  • Page 17: Basic R

    Pa b th com to con ro co 1. 2. Co in tc pro ins pa fo sys n ge 17 of 110 basic r e first time mputer conn make chan nfigure adva outer manage onfigura connect t necessary browser. Y router is manageme the same s to configu computer configurati another op obtain ip s consult the configure setup wiz m...

  • Page 18

    Pa a in con ho note lo to the th a d pa yo con ro ge 18 of 110 ccess th order to ma nfigure your w to configu be sure th internet ex 1. In w 2. In t 3. In t 4. In t 5. Ver no alternative ogin to ho use the we e router. Ty e url in the dialog box p ssword “adm u should ch nnection can outer to acce n...

  • Page 19

    Dsl-g604t generation ii adsl2+ wireless modem router page 19 of 110 www.Dlink.Com.Au configure the router when you successfully connect to the web manager, the home directory tab will display the setup wizard window. You can launch the setup wizard from this page or use the buttons located in the le...

  • Page 20

    Dsl-g604t generation ii adsl2+ wireless modem router page 20 of 110 www.Dlink.Com.Au wizard to use the setup wizard, click the run wizard button in the first browser window and follow the instructions in the pop-up window that appears. The initial window summarizes the setup process. Click the next ...

  • Page 21

    Dsl-g604t generation ii adsl2+ wireless modem router page 21 of 110 www.Dlink.Com.Au using the setup wizard - choose time zone choose the time zone you are in from the pull-down menu and click next. This sets the system time used for the router. If you wish to return to the previous window during th...

  • Page 22

    Dsl-g604t generation ii adsl2+ wireless modem router page 22 of 110 www.Dlink.Com.Au using the setup wizard - choose connection type now select the connection type used for the internet connection. Your isp has given this information to you. The connection types available for “multi-user” mode are p...

  • Page 23

    Dsl-g604t generation ii adsl2+ wireless modem router page 23 of 110 www.Dlink.Com.Au using the setup wizard - for pppoe/pppoa connections: 1. Type in the username and password used to identify and verify your account to the isp. 2. Select the specific connection type from the drop-down menu. The ava...

  • Page 24

    Dsl-g604t generation ii adsl2+ wireless modem router page 24 of 110 www.Dlink.Com.Au using the setup wizard - for dynamic ip address connections: 1. Select the specific connection type from the drop-down menu. The available dynamic ip address connection and encapsulation types are 1483 bridged ip ll...

  • Page 25

    Dsl-g604t generation ii adsl2+ wireless modem router page 25 of 110 www.Dlink.Com.Au using the setup wizard - for static ip address connections: 1. Select the specific connection type from the drop-down menu. The available static ip address connection and encapsulation types are 1483 bridged ip llc,...

  • Page 26

    Dsl-g604t generation ii adsl2+ wireless modem router page 26 of 110 www.Dlink.Com.Au using the setup wizard - for bridge mode connections: 1. Select the specific connection type from the drop-down menu. The available bridge mode connection and encapsulation types are 1483 bridged ip llc and 1483 bri...

  • Page 27

    Dsl-g604t generation ii adsl2+ wireless modem router page 27 of 110 www.Dlink.Com.Au using the setup wizard - wireless lan configuration configure the ssid and channel for the wireless lan. You may also configure wep security settings at this time or configure them later using the web manager. Selec...

  • Page 28

    Dsl-g604t generation ii adsl2+ wireless modem router page 28 of 110 www.Dlink.Com.Au using the setup wizard - wep configuration if you are configuring wep security, select the authentication type, cipher rate and encryption key. Click next to continue to the final menu..

  • Page 29

    Dsl-g604t generation ii adsl2+ wireless modem router page 29 of 110 www.Dlink.Com.Au using the setup wizard - finish and restart finally you can confirm that the setup process is completed. If you are satisfied that you have entered all the necessary information correctly, click the restart button t...

  • Page 30

    Pa w to win ho the fo 1. 2. 3. 4. 5. Note ge 30 of 110 wireless configure t ndows used ome director e first windo r basic wire click the e the ssid the default what chan remember ssid). Use channel nu the vlan (ieee 802. If network e vlan id 0 s the router’s to configur ry. To acces w that appe less...

  • Page 31

    Dsl-g604t generation ii adsl2+ wireless modem router page 31 of 110 www.Dlink.Com.Au wireless security in the wireless settings window, select the type of security you want to configure. The window will change to present the settings specific to the method being configured. The router’s wireless sec...

  • Page 32

    Dsl-g604t generation ii adsl2+ wireless modem router page 32 of 110 www.Dlink.Com.Au wpa (wi-fi protected access) wi-fi protected access was designed to provide improved data encryption, perceived as weak in wep, and to provide user authentication, largely nonexistent in wep. There are two versions ...

  • Page 33

    Dsl-g604t generation ii adsl2+ wireless modem router page 33 of 110 www.Dlink.Com.Au 802.1x some network-security experts now recommend that wireless networks use 802.1x security measures to overcome some weaknesses in standard wep applications. A radius server is used to authenticate all potential ...

  • Page 34

    Pa w to win wa suc pp fo to ma be mo the co me in sec ste set to 1. 2. N ge 34 of 110 wan configure t ndows used an settings ccessfully ac ppoe/ppp llow the inst use a pppoe ake sure yo fore you con ost users wi e settings onnection s enu. This ar the example ction can be ep-by-step i ttings for a p...

  • Page 35

    Dsl-g604t generation ii adsl2+ wireless modem router page 35 of 110 www.Dlink.Com.Au 3. Under the pppoe/pppoa heading, type the user name and password used for your adsl account. A typical user name will be in the form user1234@isp.Com.Au. The password may be assigned to you by your isp or you may h...

  • Page 36

    Dsl-g604t generation ii adsl2+ wireless modem router page 36 of 110 www.Dlink.Com.Au additional settings for pppoe/pppoa connections: pppoe/pppoa parameters description user name for ppp connections, a user name and password are used to identify and verify your account to the isp. Enter the user nam...

  • Page 37

    Dsl-g604t generation ii adsl2+ wireless modem router page 37 of 110 www.Dlink.Com.Au dynamic ip address a dynamic ip address connection configures the router to automatically obtain its global ip address from a dhcp server on the isp’s network. The service provider assigns a global ip address from a...

  • Page 38

    Dsl-g604t generation ii adsl2+ wireless modem router page 38 of 110 www.Dlink.Com.Au to configure a dynamic ip address connection for the wan, follow these steps: 1. Choose the dynamic ip address option from the wan settings pull-down menu. 2. Under the atm vc settings at the top of the window shoul...

  • Page 39

    Dsl-g604t generation ii adsl2+ wireless modem router page 39 of 110 www.Dlink.Com.Au additional settings for dynamic ip address connections: dynamic ip parameters description connection type this specifies the connection type and encapsulation method used for your dynamic ip address connection. The ...

  • Page 40

    Dsl-g604t generation ii adsl2+ wireless modem router page 40 of 110 www.Dlink.Com.Au static ip address when the router is configured to use static ip address assignment for the wan connection, you must manually assign a global ip address, subnet mask and gateway ip address used for the wan connectio...

  • Page 41

    Dsl-g604t generation ii adsl2+ wireless modem router page 41 of 110 www.Dlink.Com.Au to configure a static ip type connection for the wan, follow these steps: 1. Choose the static ip address option from the wan settings pull-down menu. 2. Under the atm vc settings at the top of the window should not...

  • Page 42

    Dsl-g604t generation ii adsl2+ wireless modem router page 42 of 110 www.Dlink.Com.Au additional settings for static ip address connections: static ip parameters description connection type this specifies the connection type and the encapsulation method used for your static ip address connection. The...

  • Page 43

    Dsl-g604t generation ii adsl2+ wireless modem router page 43 of 110 www.Dlink.Com.Au bridge mode the wan settings window is also used to configure the router for multiple virtual connections (multiple pvcs). Wan settings window – bridge mode select the connection type used for your account. The wind...

  • Page 44

    Dsl-g604t generation ii adsl2+ wireless modem router page 44 of 110 www.Dlink.Com.Au 1. Choose the bridge mode option from the wan settings pull-down menu. 2. Under the atm vc settings at the top of the window should not be changed unless you have been instructed to change them. However, if you are ...

  • Page 45

    Dsl-g604t generation ii adsl2+ wireless modem router page 45 of 110 www.Dlink.Com.Au the table below provides a description of the atm settings for traffic shaping. Atm parameters description service category the atm settings allow the user to adjust atm quality of service (qos) or traffic parameter...

  • Page 46

    Dsl-g604t generation ii adsl2+ wireless modem router page 46 of 110 www.Dlink.Com.Au atm vc settings atm vc settings can be configured for all connection types in the wan configuration menu of the home directory. Atm vc settings in wan settings menu the table below describes the atm vc settings used...

  • Page 47

    Dsl-g604t generation ii adsl2+ wireless modem router page 47 of 110 www.Dlink.Com.Au lan you can configure the lan ip address to suit your preference. Many users will find it convenient to use the default settings together with dhcp service to manage the ip settings for their private network. The ip...

  • Page 48

    Dsl-g604t generation ii adsl2+ wireless modem router page 48 of 110 www.Dlink.Com.Au dhcp the dhcp server is enabled by default for the router’s ethernet lan interface. Dhcp service will supply ip settings to workstations configured to automatically obtain ip settings that are connected to the route...

  • Page 49

    Dsl-g604t generation ii adsl2+ wireless modem router page 49 of 110 www.Dlink.Com.Au follow the instructions below according to which of the above dhcp options you want to use. When you have configured the dhcp settings as you want them, click the apply button to commit the new settings. Use the rou...

  • Page 50

    Pa st if spe the lea to in 10 tha no ge 50 of 110 tatic ip o the router ecified by th e chosen ip ase time for assign an i the spaces .1.1.Xxx for at have been ote to ma windo prope follow to sup defua g604 here a setting 0 on lan has the dhc heir mac add address use the ip addre p address th provid...

  • Page 51

    Pa d th on the ma la usi con in dis if ser ro sta if the if the wh ge 51 of 110 dns e router ca your lan. W em to the is anually ente n to use dn ing dns se nfigured). The dns r scovered dn you have no rver informa outer to auto atic ip addre you have d e preferred you choose ey will not b hen you h...

  • Page 52

    Dsl-g604t generation ii adsl2+ wireless modem router page 52 of 110 www.Dlink.Com.Au dynamic dns the router supports ddns (dynamic domain name service). The dynamic dns service allows a dynamic public ip address to be associated with a static host name in any of the many domains, allowing access to ...

  • Page 53

    Dsl-g604t generation ii adsl2+ wireless modem router page 53 of 110 www.Dlink.Com.Au save settings and reboot when you have configured the dsl-g604t with the settings you desire, make sure you save those settings. To save the system configuration settings, click the tools tab. You will be presented ...

  • Page 54

    Dsl-g604t generation ii adsl2+ wireless modem router page 54 of 110 www.Dlink.Com.Au multiple virtual connections the router supports multiple virtual connections. Up to eight pvcs to eight separate destinations can be created and operated simultaneously utilizing the same bandwidth. Additional pvc ...

  • Page 55

    Dsl-g604t generation ii adsl2+ wireless modem router page 55 of 110 www.Dlink.Com.Au to add a new virtual connection: 1. Select the new pvc to configure from the pull-down menu. 2. Enter the values for the vpi and vci given to you by your service provider. 3. To activate the vc, select enabled from ...

  • Page 56: Advanced Router Management

    Dsl-g604t generation ii adsl2+ wireless modem router page 56 of 110 www.Dlink.Com.Au 4 advanced router management directory configuration and read-only windows home click the home tab to access the setup wizard, wan settings, lan management ip configuration, dhcp settings for lan setup, dns configur...

  • Page 57

    Dsl-g604t generation ii adsl2+ wireless modem router page 57 of 110 www.Dlink.Com.Au upnp upnp supports zero-configuration networking and automatic discovery for many types of networked devices. When enabled, it allows other devices that support upnp to dynamically join a network, obtain an ip addre...

  • Page 58

    Pa vi us to la the red spe ud pri ou ser po th vir clic ge 58 of 110 virtual s e the virtua inbound (w n such as ft ese services direct these ecified priva dp/tcp port vate networ tside your f rver in the d rts. Each set e virtual ser rtual server ck the apply note us cl 0 server al server w wan-to-...

  • Page 59

    Dsl-g604t generation ii adsl2+ wireless modem router page 59 of 110 www.Dlink.Com.Au there are many different pre-configured rules available for specific functions such as internet gaming, vpn, streaming and interactive multi-media, standard tcp/ip protocols, reserved ports, p2p, network management ...

  • Page 60

    Dsl-g604t generation ii adsl2+ wireless modem router page 60 of 110 www.Dlink.Com.Au custom forwarding rules the user category for port forwarding is used to set up customized port forwarding rules. To set up custom tcp or udp port forwarding rules, follow these steps: 1. Select the user category an...

  • Page 61

    Dsl-g604t generation ii adsl2+ wireless modem router page 61 of 110 www.Dlink.Com.Au lan clients the lan clients window is used when establishing port forwarding rules in the virtual server and filters windows. This window can be accessed directly by clicking on the lan clients button in the advance...

  • Page 62

    Dsl-g604t generation ii adsl2+ wireless modem router page 62 of 110 www.Dlink.Com.Au snmp simple network management protocol is a standard for internetwork and intranetwork management. Snmp management window configure these parameters for snmp on the router: snmp category parameters snmp management ...

  • Page 63

    Pa fi filt in wa co ap pa to for set fir in filt ge 63 of 110 ilters ter rules in t a single dire an) routed d onfigure the pears listed rameters tha modify any r the set yo ttings into ef rst determin bound filte ter lan to w note 0 the router a ection to exa data. The rul filter rules in the outb ...

  • Page 64

    Dsl-g604t generation ii adsl2+ wireless modem router page 64 of 110 www.Dlink.Com.Au the parameters described in the table below are used to set up filter rules. Click the apply button to put the new rule into effect. Any filter rule configured in the menu will appear in the filters list with the ne...

  • Page 65

    Dsl-g604t generation ii adsl2+ wireless modem router page 65 of 110 www.Dlink.Com.Au bridge filters bridge filters are used to block or allow various types of packets through the wan interface. This may be done for security or to improve network efficiency. The rules are configured for individual de...

  • Page 66

    Dsl-g604t generation ii adsl2+ wireless modem router page 66 of 110 www.Dlink.Com.Au static routing use static routing to specify a route used for data traffic within your ethernet lan or to route data on the wan. This is used to specify that all packets destined for a particular network or subnet u...

  • Page 67

    Dsl-g604t generation ii adsl2+ wireless modem router page 67 of 110 www.Dlink.Com.Au dmz firewalls may conflict with certain interactive applications such as video conferencing or playing internet video games. For these applications, a firewall bypass can be set up using a dmz ip address. The dmz ip...

  • Page 68

    Dsl-g604t generation ii adsl2+ wireless modem router page 68 of 110 www.Dlink.Com.Au parental control use parental controls to deny access to specified websites or websites containing specified words in the url. Parental control menu.

  • Page 69

    Dsl-g604t generation ii adsl2+ wireless modem router page 69 of 110 www.Dlink.Com.Au url blocking url or uniform resource locator is a specially formatted text string that uniquely defines an internet website. This window will allow users to block computers on the lan from accessing certain urls. Th...

  • Page 70

    Pa fi wh ne th al pr ag th (d th pa yo pr at pr se th se pr ge 70 of 110 irewall hen dos, po twork agains dos prote syn flood ch icmp redirec he firewa lows the redefined p gainst certa here are two dos, port sc he router, a acket types s ou can cho rotection ag ttack and rotection o elect the sta h...

  • Page 71

    Dsl-g604t generation ii adsl2+ wireless modem router page 71 of 110 www.Dlink.Com.Au a dos "denial-of-service" attack is characterised by an explicit attempt by attackers to prevent legitimate users of a service from using that service. Examples include: attempts to "flood" a network, thereby preven...

  • Page 72

    Dsl-g604t generation ii adsl2+ wireless modem router page 72 of 110 www.Dlink.Com.Au adsl the adsl configuration window allows the user to set the configuration for adsl protocols. For most adsl accounts the default settings adsl2+ (multi-mode) will work. This configuration works with all adsl imple...

  • Page 73

    Dsl-g604t generation ii adsl2+ wireless modem router page 73 of 110 www.Dlink.Com.Au atm vcc the atm vc setting window is used to configure the wan connection. If you are using multiple pvcs, you can change the configuration of any pvc in this window. To create new or additional pvcs, read the secti...

  • Page 74

    Pa q qo int the th ma fro mu use ser to op for cho ba ge 74 of 110 qos os or quality terfaces (lan e lowest. E igmp p anagement p om the lan ulticasting (s e igmp to p rvice provide set qos fo en the follow r this combin oosing the andwidth in note 0 y of service n and wan) roxy/snoo protocol) pac t...

  • Page 75

    Dsl-g604t generation ii adsl2+ wireless modem router page 75 of 110 www.Dlink.Com.Au qos configuration window for port mapping qos the router can also be configured to use the qos infomation contained in the header of ip packets. This will open the following window. To set ip qos for the router, fir...

  • Page 76

    Dsl-g604t generation ii adsl2+ wireless modem router page 76 of 110 www.Dlink.Com.Au qos configuration window ip qos if you select disablein the classified by drop-down menu, you can assign a maximum allowed bandwidth of between 64 kbps and auto to each of the pvcs configured on the router..

  • Page 77

    Dsl-g604t generation ii adsl2+ wireless modem router page 77 of 110 www.Dlink.Com.Au additional options become available when you select either tos, application, or user definefrom the classified by drop-down menu. Selecting toswill display the following window. Qos configuration window ip qos for t...

  • Page 78

    Dsl-g604t generation ii adsl2+ wireless modem router page 78 of 110 www.Dlink.Com.Au if you select application from the classified by drop-down menu, the following window appears. Qos configuration window ip qos for application on this window, you can select the mechanism by which the four priority ...

  • Page 79

    Dsl-g604t generation ii adsl2+ wireless modem router page 79 of 110 www.Dlink.Com.Au if you select user define in the classified by drop-down menu, the following window appears. Qos configuration window ip qos for user define on this window, you can assign a weight, on a percentage basis, to each of...

  • Page 80

    Dsl-g604t generation ii adsl2+ wireless modem router page 80 of 110 www.Dlink.Com.Au wireless management the wireless management menu includes separate menus for access list, associated stations display and multiple ssid operation. Click the appropriate radio button to view the menu for any of these...

  • Page 81

    Dsl-g604t generation ii adsl2+ wireless modem router page 81 of 110 www.Dlink.Com.Au associated stations use the associated stations list to view wireless stations currently associated with the access point. Wireless management – associated stations display the associated stations list displays the ...

  • Page 82

    Dsl-g604t generation ii adsl2+ wireless modem router page 82 of 110 www.Dlink.Com.Au multiple ssid the access point in the router supports use of multiple ssids. Up to 4 ssids may be used. Use the multiple ssid menu to enable, create and configure additional ssids for your wireless network. Wireless...

  • Page 83

    Dsl-g604t generation ii adsl2+ wireless modem router page 83 of 110 www.Dlink.Com.Au wireless performance the wireless performance window is used to configure settings for the access point feature of this device. Configuring these settings may increase the performance of your router but if you are n...

  • Page 84

    Dsl-g604t generation ii adsl2+ wireless modem router page 84 of 110 www.Dlink.Com.Au performance parameters description beacon interval beacons are emitted from the router in order to synchronize the wireless network. You may set the beacon interval range between 20-100 microseconds per beacon sent....

  • Page 85: Tools

    Dsl-g604t generation ii adsl2+ wireless modem router page 85 of 110 www.Dlink.Com.Au tools click the tools tab to reveal the window buttons for various functions located in this directory. The administrator settings window is the first item in the tools directory. This window is used to change the s...

  • Page 86

    Pa a cli ch cli pa or pa mo pa act ma yo the ge 86 of 110 dmin ck the adm hange sy ck the adm ssword leve modify use ssword, type odify admin assword to tivate the n anager interf u may also u e port used b note 0 in button in stem pas min button i l being chan er passwor e the new n password be cer...

  • Page 87

    Dsl-g604t generation ii adsl2+ wireless modem router page 87 of 110 www.Dlink.Com.Au remote web management and remote telnet access the administrator settings window is also used to enable remote telnet management, remote ssh management and remote web management access to the router. In each case, t...

  • Page 88

    Dsl-g604t generation ii adsl2+ wireless modem router page 88 of 110 www.Dlink.Com.Au time the router provides a number of options to maintain current date and time including sntp. Time menu to configure system time on the router, select the method used to maintain time. The options available include...

  • Page 89

    Dsl-g604t generation ii adsl2+ wireless modem router page 89 of 110 www.Dlink.Com.Au remote log use the remote log settings window to set up logging to servers or computers that are located outside the lan or subnet of the router. Remote log settings window select the log level from the pull-down me...

  • Page 90

    Dsl-g604t generation ii adsl2+ wireless modem router page 90 of 110 www.Dlink.Com.Au system once you have configured the router to your satisfaction, it is a good idea to back up the configuration file to your computer. To save the current configuration settings to your computer, click the system bu...

  • Page 91

    Pa fi us con set to cli ge 91 of 110 irmwar note e the firm nfiguration s ttings with t upgrade fir ck the appl 0 re performing a up the route mware upg settings ma he system mware, type y button to dsl-g604t a firmware up er’s configurat rade windo y return to settings wi e in the nam begin copyin ...

  • Page 92

    Dsl-g604t generation ii adsl2+ wireless modem router page 92 of 110 www.Dlink.Com.Au miscellaneous to perform a statndard ping test for network connectivity, click the misc. Window button in the tools directory to view the miscellaneous configuration window. Miscellaneous configuration window other ...

  • Page 93

    Dsl-g604t generation ii adsl2+ wireless modem router page 93 of 110 www.Dlink.Com.Au test the diagnostic test window is used to test connectivity of the router. A ping test may be done through the local or external interface to test connectivity to known ip addresses. The diagnostics feature execute...

  • Page 94: Status

    Dsl-g604t generation ii adsl2+ wireless modem router page 94 of 110 www.Dlink.Com.Au status use the various read-only windows to view system information and monitor performance. Device info use the device information window to quickly view basic current information about the lan and wan interfaces a...

  • Page 95

    Dsl-g604t generation ii adsl2+ wireless modem router page 95 of 110 www.Dlink.Com.Au dhcp clients this window will display all of the current dhcp clients that are connected to the router. Dhcp clients window.

  • Page 96

    Dsl-g604t generation ii adsl2+ wireless modem router page 96 of 110 www.Dlink.Com.Au log the system log displays chronological event log data. Use the navigation buttons to view or scroll log pages. You may also save a simple text file containing the log to your computer. Click the save log button a...

  • Page 97

    Dsl-g604t generation ii adsl2+ wireless modem router page 97 of 110 www.Dlink.Com.Au statistics use the traffic statistics window to monitor traffic on the ethernet, wireless or adsl connection. Select the interface for which you want to view packet statistics and the information will appear below. ...

  • Page 98

    Dsl-g604t generation ii adsl2+ wireless modem router page 98 of 110 www.Dlink.Com.Au adsl status use the adsl status window for troubleshooting the adsl connection. Adsl status information.

  • Page 99

    Dsl-g604t generation ii adsl2+ wireless modem router page 99 of 110 www.Dlink.Com.Au help click the desired hyperlink to access help files. Help window.

  • Page 100: Technical Specifications

    Dsl-g604t generation ii adsl2+ wireless modem router page 100 of 110 www.Dlink.Com.Au a technical specifications general adsl standards: adsl standards ansi t1.413 issue 2 itu g.992.1 (g.Dmt) annex a itu g.992.2 (g.Lite) annex a itu g.994.1 (g.Hs) itu g.992.5 annex a adsl2 standards • itu g.992.3 (g...

  • Page 101

    Dsl-g604t generation ii adsl2+ wireless modem router page 101 of 110 www.Dlink.Com.Au physical and environmental dc inputs: power adapter: input: 120v ac 60hz output: 12v dc, 1200ma power consumption: 10 watts (max) operating temperature: 0° to 40°c storage temperature -20° to 70°c humidity: 5% to 9...

  • Page 102

    Dsl-g604t generation ii adsl2+ wireless modem router page 102 of 110 www.Dlink.Com.Au wireless standards ieee 802.11g, ieee 802.11b modulation ieee 802.11b: dqpsk, dbpsk, dsss, and cck ieee 802.11g: bpsk, qpsk, 16qam, 64qam, ofdm frequency 2.4 ghz to 2.46 ghz (2400 ~ 2484.5mhz ism band) operating ra...

  • Page 103: Config

    Pa c in ins yo exa fo sys ins ro fo sys co us 1. 2. Ge 103 of 11 config order to con stalled. If yo u are using ample of ho llowing this stems to fir stalling it. O outer. R computers stem to rece note if y ins ad onfigure e the followi from the s in the con 10 uring nfigure your ou have an e window...

  • Page 104

    Dsl-g604t generation ii adsl2+ wireless modem router page 104 of 110 www.Dlink.Com.Au 3. In the network and internet connections window, click network connections. 4. In the network connections window, right-click on local area connection, then click properties. 5. In the general tab of the local ar...

  • Page 105

    Dsl-g604t generation ii adsl2+ wireless modem router page 105 of 110 www.Dlink.Com.Au 6. Select “obtain an ip address automatically” by clicking once in the circle. Click the ok button your computer is now ready to use the router’s dhcp server. Click properties. Select obtain an ip address automatic...

  • Page 106

    Dsl-g604t generation ii adsl2+ wireless modem router page 106 of 110 www.Dlink.Com.Au windows 2000 first, check for the ip protocol and, if necessary, install it: 1. In the windows task bar, click the start button, point to settings, and then click control panel. 2. Double-click the network and dial...

  • Page 107

    Dsl-g604t generation ii adsl2+ wireless modem router page 107 of 110 www.Dlink.Com.Au windows me first, check for the ip protocol and, if necessary, install it: 1. In the windows task bar, click the start button, point to settings, and then click control panel. 2. Double-click the network and dial-u...

  • Page 108: Low Pass Filters For Dsl

    Dsl-g604t generation ii adsl2+ wireless modem router page 108 of 110 www.Dlink.Com.Au c low pass filters for dsl most adsl clients will be required to install a simple device that prevents the adsl line from interfering with regular telephone services. These devices are commonly referred to as micro...

  • Page 109

    Dsl-g604t generation ii adsl2+ wireless modem router page 109 of 110 www.Dlink.Com.Au three port filter another style of filter is installed at the same point where the router connects to the telephone line. Only a single filter is required. The connection ports are typically labeled as follows: lin...

  • Page 110: Technical Support

    Dsl-g604t generation ii adsl2+ wireless modem router page 110 of 110 www.Dlink.Com.Au technical support you can find software updates and user documentation on the d-link website. D-link australia 1 giffnock avenue north ryde, nsw 2113 sydney, australia tel: +61-2-8899-1800 fax: +61-2-8899-1868 aust...