D-Link Web Smart DES-1210-28P Reference Manual - page 69
5 Configuration
D-Link Web Smart Switch User Manual
Figure 104 – Access Rule List
Profile ID:
Indicates the corresponding access profile Identification number.
Access ID:
Indicates the access rule Identification number.
Profile Type:
Displays the profile type.
Summary:
Displays the access rule summary.
Action:
Displays the access rule action.
To add a new rule, click
Add Rule
:
Figure 105 – Add Access Rule
Profile Information
displays the information to which the rule is being added to, including
Profile ID
and
other fields specified.
In
Rule Detail
, you can specify the details of an access rule. Below is all the possible parameters can be set.
Access ID:
Specify the Access ID (1-65535).
Type:
Display the type of rule.
VLAN ID:
The VLAN ID for a previously configured VLAN.
Destination MAC Address:
Specify the Destination MAC address, the field of format is xx-xx-xx-xx-
xx-xx.
Source MAC Address:
Specify the Source MAC address, the field of format is xx-xx-xx-xx-xx-xx.
802.1p:
Specify the 802.1p priority value.
Ether Type:
Specify the Ethernet Type value.
Destination IP Address:
Specify the Destination IP address.
Source IP Address:
Specify the Source IP address.
DSCP:
Specify the DSCP value.
IP Protocol:
The L4 protocol above IP. Possible values are ICMP, IGMP, TCP, and UDP.
6
6
3
3