D-Link Web Smart DES-1210-28P Reference Manual - page 74
5 Configuration
D-Link Web Smart Switch User Manual
LLDP > LLDP-MED Settings (Only for DES-1210-28P)
LLDP-MED (Link Layer Discovery Protocol-Media Endpoint Discovery) is an enhancement of LLDP. It
improves the LLDP operation between endpoint devices such as IP phones and APs. LLDP-MED supports
features such as Auto-discovery of LAN policies and device location discovery. Currently, DES-1210-28P
supports only the extended and automated power management of PoE end points for 802.3at ports (ports
1~4).
This page allows you to configure the
Power PSE TLV
(Type-length-value) state of 802.3at ports. Select
From Port
/
To Port
and
Enable
/
Disable
and then click
Apply
to turn on/off the
Power PSE TLV
transmission.
Figure 114 – LLDP > LLDP-MED Settings
68