D-Link Web Smart DES-1210-28P Reference Manual - page 77
6 Command Line Interface
D-Link Web Smart Switch User Manual
Logout
This command closes the current connection.
Syntax
logout
Example
DES-1210-28P> logout
Figure 118 – The logout command
Ping
This command checks if another IP address is reachable on the network. You can ping the IP
address connected to through the managed VLAN (VLAN 1 by default), as long as there is a physical
path between the switch and the target IP equipment. By default, Switch sends five pings to the
target IP.
Syntax
ping
Parameter
Parameter
Description
The IP address of the target station.
times 255)> Specify how many ping requests will be sent to the target IP address. timeout (1-99)> Specify the timeout interval waiting the ping reply for target IP address. Example DES-1210-28P> ping 10.90.90.91 times 3 timeout 1 Reply Received From :10.90.90.91, TimeTaken : 20 msecs Reply Received From :10.90.90.91, TimeTaken : 20 msecs Reply Received From :10.90.90.91, TimeTaken : 20 msecs --- 10.90.90.91 Ping Statistics --- 3 Packets Transmitted, 3 Packets Received, 0% Packets Loss DES-1210-28P> Figure 119 – The ping command Note: DES-1210-08P does not support times and timeout configurations. Reboot This command reboots the system. All network connections are terminated and the boot code executes. Syntax reboot Example DES-1210-28P> reboot % Device will reboot, please wait a few minutes to re-login. DES-1210-28P> 7 7 1 1