D-Link xStack DES-3526DC User Manual - Snmp User Table

xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 

142

SNMP User Table  

The 

SNMP User Table 

displays all of the SNMP User's currently configured on the Switch. 

In the 

SNMP Manager

 folder, located in the 

Security Management

 folder, click on the 

SNMP User Table

 link.  This will open 

the 

SNMP User Table 

window, as shown below. 

Figure 7- 28. SNMP User Table window 

To delete an existing SNMP User Table entry, click the 

X

 below the Delete heading corresponding to the entry you wish to delete. 

To display the detailed entry for a given user, click on the hyperlinked User Name. This will open the 

SNMP User Table Display

window, as shown below. 

Figure 7- 29. SNMP User Table Display window 

The following parameters are displayed: 

Parameter                       Description 

User Name 

An alphanumeric string of up to 32 characters. This is used to identify the SNMP users. 

Group Name 

This name is used to specify the SNMP group created can request SNMP messages. 

SNMP Version 

V1

 - Indicates that SNMP version 1 is in use.  

V2 

- Indicates that SNMP version 2 is in use. 

V3 

- Indicates that SNMP version 3 is in use. 

Auth-Protocol 

None

 - Indicates that no authorization protocol is in use. 

MD5

 - Indicates that the HMAC-MD5-96 authentication level will be used. 

SHA

 - Indicates that the HMAC-SHA authentication protocol will be used.

Priv-Protocol 

None 

- Indicates that no authorization protocol is in use. 

DES 

- Indicates that DES 56-bit encryption is in use based on the CBC-DES (DES-56) 

standard.

To return to the SNMP User Table, click the 

Show All SNMP User Table Entries

 link. 

To add a new entry to the 

SNMP User Table Configuration 

window, click on the 

Add 

button on the

 SNMP User Table

 window.  

This will open the 

SNMP User Table Configuration

 window, as shown below.