D-Link xStack DES-3526DC User Manual - Download Configuration File
xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
173
Information about firmware on the Switch can be viewed in the Firmware Management table in the same window. It holds the
following information:
Parameter Description
ID
The user-defined Section ID of the firmware on the Switch.
Boot Status
The firmware that is currently being run on the Switch will be identified in this field with the term
"Boot".
Version
The runtime version of the firmware.
Size
The size of the firmware, in bytes.
Date
The date that the firmware was added to the Switch.
From
The IP address of the Server from which the firmware came.
User
The name of the user who downloaded the firmware.
Set Boot
Click the
Apply
button in this field to set the firmware version to be used upon the next boot up of
the Switch.
Delete
Click the
X
in this column to permanently delete the corresponding firmware from the Switch.
Download Configuration File
To download a settings file from a TFTP server, click on the
TFTP Service
folder in the
Maintenance
folder and then the
Download Configuration File
link:
Figure 9- 2. Download Settings from TFTP Server window
Enter the IP address of the TFTP server and specify the location of the switch settings file on the TFTP server.
Click
Start
to record the IP address of the TFTP server and to initiate the file transfer.
Upload Configuration
To upload the switch settings to a TFTP server, click on the
TFTP Services
folder, located in the
Maintenance
folder, and then
click the
Upload Configuration
link:
Figure 9- 3. Upload Settings to TFTP Server window
Enter the IP address of the TFTP server and the path and filename for the switch settings on the TFTP server.
Click
Start
to record the IP address of the TFTP server and to initiate the file transfer.