D-Link xStack DGS-3400 Series User Manual - Ip-Mac Binding Port
Other manuals for xStack DGS-3400 Series:
Manual, Cli Reference Manual, Reference Manual, Reference Manual
Manual is about: Layer 2 Managed Gigabit Ethernet Switch
of
326
xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
IP-MAC Binding Port
To enable or disable IP-MAC binding on specific ports, click
IP-MAC Binding Port in the IP-MAC Binding folder on
the Administration Menu to open the IP-MAC Binding
Ports Setting window. Select a port or a range of ports with
the From and To fields. Enable or disable the port with the
State field. The user must also enable ports in this window to
set the ACL Mode for IP-MAC Binding, as previously stated.
Click Apply to save changes.
Figure 6- 66. IP-MAC Binding Ports window
91