D-Link xStack DGS-3400 Series User Manual - 802.1X User
xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
authentication server. The default setting is 30 seconds.
MaxReq
The maximum number of times that the Switch will retransmit an EAP Request to the client
before it times out of the authentication sessions. The default setting is 2.
ReAuthPeriod
A constant that defines a nonzero number of seconds between periodic reauthentication of the
client. The default setting is 3600 seconds.
ReAuth
Determines whether regular reauthentication will take place on this port. The default setting is
Disabled.
Capability
This allows the 802.1X Authenticator settings to be applied on a per-port basis. Select
Authenticator to apply the settings to the port. When the setting is activated, a user must pass
the authentication process to gain access to the network. Select None disable 802.1X functions
on the port.
Click Apply to implement your configuration changes. To view configurations for the 802.1X Authenticator Settings on a port-
by-port basis, see the 802.1X Authenticator Settings table.
802.1X User
In the Security folder, open the 802.1X folder and click 802.1X User to open the 802.1X User window. This window will allow
the user to set different local users on the Switch.
Figure 9- 8. 802.1X User and 802.1X User Table window
Enter a User Name, Password and confirmation of that password. Properly configured local users will be displayed in the 802.1X
User Table in the same window.
189