D-Link xStack DGS-3400 Series User Manual - Web Pages
xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Area Function
Area 1
Select the menu or window to display. Open folders and click the hyperlinked menu buttons and
subfolders contained within them to display menus. Click the D-Link logo to go to the D-Link website.
Area 2
Presents a graphical near real-time image of the front panel of the Switch. This area displays the
Switch's ports and expansion modules, showing port activity, duplex mode, or flow control,
depending on the specified mode.
Some management functions, including port configuration are accessible here.
Area 3
Presents switch information based on user selection and the entry of configuration data.
Web Pages
When connecting to the management mode of the Switch with a web browser, a login screen is displayed. Enter a user name and
password to access the Switch's management mode.
Below is a list of the main folders available in the web interface:
Administration – Contains the following menu pages and sub-directories: IP Address, Interface Settings, Stacking, Port
Configuration, User Accounts, Port Mirroring, System Log, System Severity Settings, SNTP Settings, MAC Notification Settings,
TFTP Services, Multiple Image Services, Ping Test, Safeguard Engine, Static ARP Settings, IPv6 Neighbor, Routing Table,
DHCP/BOOTP Relay, DHCP Auto Configuration, SNMP Manager, IP-MAC-Port Binding, PoE (DGS-3426P only), and Single
IP Management Settings.
L2 Features – Contains the following menu pages and sub-directories: VLAN, Trunking, IGMP Snooping, MLD Snooping,
Spanning Tree and Forwarding & Filtering.
QoS – Contains the following menu pages and sub-directories: Bandwidth Control, QoS Scheduling Mechanism, QoS Output
Scheduling, 802.1p Default Priority and 802.1p User Priority.
ACL – Contains the following menu pages and sub-directories: Time Range, Access Profile Table and CPU Interface Filtering.
Security – Contains the following menu pages and sub-directories: Traffic Control, Port Security, 802.1X, Trust Host, Access
Authentication Control, Traffic Segmentation, SSL and SSH.
Monitoring – Contains the following menu pages and sub-directories: Device Status, Stacking Information, Module Information,
CPU Utilization, Port Utilization, Packets, Errors, Packet Size, Browse Router Port, Browse MLD Router Port, VLAN Status,
Port Access Control, MAC Address Table, IGMP Snooping Group, MLD Snooping Group, Switch Logs, Browse ARP Table,
Session Table, IP Forwarding Table and Browse Routing Table.
Save Services – Contains the following menu pages and sub-directories: Save Changes, Configure Information and Current
Configuration Settings.
Reset, Reboot System and Logout menu links are displayed in the main directory.
NOTE: Be sure to configure the user name and password in the User
Accounts menu before connecting the Switch to the greater network.
29