D-Link xStack DGS-3426P User Manual - Double Vlan

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch 

Double VLAN 

In the L2 Features menu, open the VLAN folder and click Double VLAN Settings, which will display the following window to 

enable the Double VLAN feature. 

Figure 7- 9.  Double VLAN State Settings 

Choose  Enabled using the pull-down menu and click Apply. The user will be prompted with the following warning window. 

Click OK to continue. 

After being prompted with a success message, the user will be presented with this window to configure for Double VLANs. 

Figure 7- 10. Double VLAN Table 

Parameters shown in the previous window are explained below: 

Parameter                 Description 

Double VLAN 

State 

Use the pull-down menu to enable or disable the Double VLAN function on this Switch. Enabling 

the Double VLAN will return all previous VLAN configurations to the factory default settings and 

remove Static VLAN configurations from the GUI. 

SPVID 

The VLAN ID number of this potential Service Provider VLAN. 

VLAN Name 

The name of the VLAN on the Switch. 

TPID 

The tagged protocol ID of the corresponding VLAN that will be used in identification of this 

potential Double VLAN, written in hex form. 

The user may view configurations for a Double VLAN by clicking its corresponding 

 button, which will display the following 

read-only window. 

120