D-Link xStack DGS-3426P User Manual - Forwarding & Filtering

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch 

Forwarding & Filtering 

Unicast Forwarding 

                                                                   Figure 7- 44. Setup Static Unicast Forwarding Table window 

To add or edit an entry, define the following parameters and then click Add/Modify: 

Parameter                    Description 

VLAN ID (VID) 

The VLAN ID number of the VLAN on which the above Unicast MAC address resides. 

MAC Address 

The MAC address to which packets will be statically forwarded. This must be a unicast MAC 

address. 

Unit 

Select the switch in the switch stack to be modified. 

Port 

Allows the selection of the port number on which the MAC address entered above resides. 

Click Add to implement the changes made. To delete an entry in the Static Unicast Forwarding Table, click the corresponding 

under the Deleteheading.  

Multicast Forwarding 

The following figure and table describe how to set up Multicast Forwarding on the Switch. Open the Forwarding & Filtering 

folder and click on the Multicast Forwarding link to see the entry screen below: 

Figure 7- 45. Static Multicast Forwarding Settings window 

The Static Multicast Forwarding Settings window displays all of the entries made into the Switch's static multicast forwarding 

table.  Click the Add button to open the Setup Static Multicast Forwarding Table window, as shown below: 

Figure 7- 46. Setup Static Multicast Forwarding Table window 

Open the Forwarding & Filtering folder in the

Layer 2 Features menu and click on the

Unicast Forwarding link. 

148