D-Link xStack DGS-3426P User Manual - Stp Instance Settings

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch 

STP Instance Settings 

The following window displays MSTIs currently set on the Switch. To view the following table, click Layer 2 Features  > 

Spanning Tree > STP Instance Settings:  

Figure 7- 41. STP Instance Table  

The following information is displayed: 

Parameter                       Description 

Instance Type 

Displays the instance type(s) currently configured on the Switch. Each instance type is 

classified by a MSTI ID. CIST refers to the default MSTI configuration set on the Switch. 

Instance Status 

Displays the current status of the corresponding MSTI ID 

Instance Priority 

Displays the priority of the corresponding MSTI ID. The lowest priority will be the root bridge. 

Click Apply to implement changes made. 

Click the Modify button to change the priority of the MSTI. This will open the Instance ID Settings window to configure. 

Figure 7- 42. STP Instance Settings Modify  

Parameter                   Description 

MSTI ID 

Displays the MSTI ID of the instance being Modified. An entry of 0 in this field denotes the CIST 

(default MSTI). 

Type 

The Type field in this window will be permanently set to Set Priority Only. 

Priority (0-61440) 

Enter the new priority in the Priority field 

Click Apply to implement the new priority setting. 

145