D-MAX DCC-500D User Manual - page 10
8) SPECIAL
- Please position the arrow to point to
'SPECIAL' on the SETUP menu by using
the UP and DOWN buttons.
- Please select the mode you wish to
operate by pressing the UP or DOWN
button
CAMERA ID : If the ID is input, the camera ID appears on the
monitor.
- Please position the arrow to point to
'CAMERA ID' by using the UP or DOWN
button.
- Please select 'ON' by pressing the LEFT
or RIGHT button.
LEFT or RIGHT button.
- Please press the SETUP button when all
the settings are complete.
- The maximum storage magnification in
low light level movement situations can
be adjusted by pressing the SETUP
button in 'AUTO' mode.(X2~X128)
- As the magnification increases, the screen gets brighter; however
the after image also increases
- If storage magnification is increased while SENS UP is operating,
it may cause noise, and spots may appear; however this is
normal.
AUTO : Low light level auto mode
OFF : The function does not operate
16
17
SETUP
LENS MNUAL
SHUTTER
ESC
WHITE BAL
ATM
BACKLIGHT
OFF
AGC
LOW
DNR
LOW
SENS-UP
OFF
SPECIAL
EXIT
SETUP
LENS MNUAL
SHUTTER
ESC
WHITE BAL
ATM
BACKLIGHT
OFF
AGC
LOW
DNR
LOW
SENS-UP
OFF
SPECIAL
EXIT
SETUP
CAMERA ID
OFF
COLOR
ON
SYNC
INT
MOTION DET
OFF
PRIVACY
OFF
MIRROR
OFF
SHARPNESS
ON
RESET
RETURN
When SHUTTER is in the manual mode, SENS UP does not
operate.
When AGC is turned off, SENS UP does not operate.
Note