Summary of DCC-500D
Page 1
High resolution / day&night color dome type camera 680 tvl, 960h manual.
Page 2
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point with...
Page 3
3 the camera needs periodic inspection. Contact an authorized technician for inspection. Stop using your camera when you find a malfunction. If you use your camera around smoke or unusual heat for a long time, fire may be caused. Do not install the camera on a surface that can not support it. Unless...
Page 4
4 only use the camera under conditions where temperatures are between -10°c and +50°c. Be especially careful to provide ventilation when operating under high temperatures . It can cause the image quality to be poor. Severe lighting change or flicker can cause the camera to work improperly. It is one...
Page 5
5 1.Features --------------------------------- 6 2. Cable connection & osd control --------------------------------- 7 3. Setup menu operation --------------------------------- 8 4. Troubleshooting --------------------------------- 18 5. Dimensions --------------------------------- 19 6. Specificati...
Page 6
6 ☺ultra high resolution 680 tv lines clear image quality has been achieved by employing a double-speed sony ccd with 960h, which provides a horizontal resolution of 680 tv lines. ☺excellent sensitivity the built-in high sensitivity color ccd enable a clear image even in 0.1lux (color), 0.00001lux (...
Page 7
7 from being too bright, which helps you identity the object in near distance. ☺visibility: 30m in b/w mode , the ir indicator turns on with the effective visibility of 30m at 0 lux.
Page 8
8 cable connection 2. Cable connection.
Page 9
9 • menu structure lens dc / video / manual exposure shutter auto / flk / manual / 1/60 agc low / middle / high / off sense-up auto / off return back light off / dwdr / blc / hsblc white bal atw / awb / awc-set / manual day & night auto / ext / night / color smart 3dnr off / on f-dnr off / manual / ...
Page 10
10 ③ please press the left or right button if you wish to change mode. When the left or right button is pressed, available values and modes are displayed in order. Please keep pressing the button until you get to the mode you wish to operate. ④ please select 'exit' and then press the setup button to...
Page 11
11 shutter: select shutter speed. The default value is auto. ▶ auto, flk, manual, 1/50 agc (auto gain control) ▶ low / middle / high sens-up (digital slow shutter) ▶ off / auto (x2~x256) 3. Back light this function is used to view a picture more clearly under back light condition. ▶ blc enable a use...
Page 12
12 ▶ awc->set: to find the optimal setting for the current luminance environment in this mode, put the camera towards a sheet of white paper. ▶ manual: select this to fine-tune white balance manually. Set white balance first by using the atw or awb mode. After that switch to manual mode, fine-tune t...
Page 13
13 white balance is deactivated.) if day night mode is auto, the agc is fixed high. Ir led: if you use ir led, select on mode. Ir smart: when the ir camera is used, this function can suppresses saturation of the picture that happens in the short distance from object and you can set area up that you ...
Page 14
14 f-dnr off f-dnr on 8. Function 1) motion motion detection function allows more effective observation. When any movement is detected, signal is generated ▶ on : if ‘motion’ function is active, character of person is flickering on right above position when motion is detected on selected area. Area:...
Page 15
15 2) privacy (polygon) you may conceal specific area on the screen with this ‘privacy’ function. Area: select the programmed privacy area (area 1~8) area display: turn on and off the programmed privacy masking. Set position and area size for privacy masking using arrow color: setup color of the pro...
Page 16
16 - color gain: adjust color gain ▶ lcd: select this menu when using a lcd monitor - gamma: adjust gamma level - ped level: adjust ped level. - color gain: adjust color gain lens shading: when setting the zoom to maximum and lens angle of view are saturated on screen, set on to make the lens edge i...
Page 17
17 • int : internal synchronization type • l/l : power synchronization type, line-lock press the set button and you can select a desired phase between 0 and 359. Synchronization. • when the power is dc 12v, the menu is fixed to the ‘int’ mode. 7) language it can be switched to english, korean, polis...
Page 18
18 if there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from . Problems troubleshooting nothing appears on the screen. • please check the power connection. • please check the video signal line connection. • ...
Page 19
19 dome camera n1 n2 n3 5. Dimensions.
Page 20
20 vandal dome camera n4 n5 ir vandal dome camera n6.
Page 21: 6. Specifications
21 ▪ general signal system ntsc pal image sensor 1/3” 960h super had sony ccd∥ total pixels 1028(h)x508(v) 1028(h)x596(v) effective pixels 976(h)x494(v) 976(h)x582(v) resolution 680 tv lines (b/w 750 tv lines with icr) scanning frequency 15.734khz(h), 60hz(v) 15.625khz(h), 50hz(v) min. Illumination ...
Page 22
22 dome type vandal dome type ir vandal dome number 1 2 3 install type indoor indoor indoor dimension(mm) 100x76.5(h) 120x95(h) 100x103(h) 3 axis 2 axis 2 axis 3axis material plastic body & bubble plastic body & bubble pc bubble & plastic body weight 300g 560g 400g power consumption max 1.8w max 2.5...
Page 23
23.
Page 24: Distributed By
24 distributed by.