D-MAX DCC-500D Manual - page 16
16
- COLOR GAIN: Adjust COLOR GAIN
▶ LCD: Select this menu when using a LCD monitor
- GAMMA: Adjust GAMMA level
- PED LEVEL: Adjust PED level.
- COLOR GAIN: Adjust COLOR GAIN
LENS SHADING: When setting the zoom to maximum and Lens angle of view are
saturated on screen, set ON to make the Lens edge invisible.
It might happen only if fluorescent light is shined fully on screen.
DEFECT: When the camera has white defect in the CCD with ages, user can restore
it using OSD menu.
- Sense-up: User can adjust white defect according to luminous condition.
- DIFF: User has to select level(1~4) according to size of the white defect. If it is big,
you have to select high number
- START: Before pressing the Start menu, you have to cover camera lens using lens
cap
5) CAMERA TITLE
If the TITLE is input, the camera TITLE appears on the monitor.
Select an ID from A,B~Y,Z, 0,1~8,9.
Note) If the wrong name has been input.....
• If you press the SETUP button after moving the
cursor to CLR, all the letters will be erased. If you
want to correct a letter, please move the cursor
to the arrow at the bottom left of the screen and
press 'SET'.
• Please position the cursor above the letter you
wish to correct, and then move the cursor on to
the letter you wish to choose and press the SETUP button.
• When a name has been chosen, please select a position for the name display.
▪ Please move the cursor onto 'POS' and then press the SETUP button.
▪ The name will appear at the top left corner.
▪ Please find the position you wish to display the name in by using the 4 directional
buttons,
and then press the SETUP button.
▪Please select 'END' and then press the SETUP button to complete ID input.
6) SYNC
In areas where the supply is at 60Hz/NTSC (50Hz/PAL), you can synchronize the
output phase of multiple cameras using the power synchronization
function (Line-Lock) without using a synchronization signal generator.