D-MAX DCC-500D Manual - page 12
12
▶ AWC->SET: To find the optimal setting for the current luminance environment
in this mode, put the camera towards a sheet of white paper.
▶ MANUAL: Select this to fine-tune White
Balance manually. Set White Balance first by
using the ATW or AWB mode. After that switch
to MANUAL mode, fine-tune the White Balance.
Note)
• Under the following conditions the WHITE BALANCE function may not operate
properly. In such cases, please select the AWB mode.
When the object’s surroundings have a very high color temperature such as a clear
sky.
When the object’s surroundings are dark, If the camera directly faces a fluorescent
light or is installed in a place where there are considerable changes in illumination,
the WHITE BALANCE function may become unstable
.
5. DAY&NIGHT
You can display pictures in color or B/W.
Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
▶ COLOR: The picture is always displayed in color.
▶
AUTO: The mode is switched to
‘Color’ in a normal environment, but switches to
‘B/W’ mode when ambient illumination is low.
- DELAY: adjusting converting speed for
COLOR ↔ BW
- D→N: user can adjust luminous level to
convert from Day to Night.
- N→D: user can adjust luminous level to
convert from Night to Day.
▶ EXT: This mode allows you to apply a
desired filter to external signals.
▶
B/W: This mode allows you to apply a
desired filter to external signals.
BURST: If it cannot be synchronizing video on
the monitor in the BW mode of camera, it turns
on.(When the camera in B/W mode, the
MANUAL WD
▶1. BLUE IIIIIIIII 1~100
2. RED IIIIIIIII 1~100
3. RETURN RET↙
D&N AUTO
▶DELAY IIIIIIIIIIIIIIIIII 0~15
D→N IIIIIIIIIIIIIIIIIII 16~249
N←D IIIIIIIIIIIIIIIIIII 1~233
RETURN RET↙
D&N NIGHT
▶BURST OFF
IR SMART OFF
IR LED ON
RETURN RET↙
D&N EXT
▶DELAY IIIIIIIIIIIIIIIIIIIII 0~15
RETURN RET↙