D-MAX DCC-500D Manual - page 13
13
WHITE BALANCE is deactivated.) If DAY NIGHT mode is AUTO, the AGC is fixed
HIGH.
IR LED: if you use IR LED, select On mode.
IR SMART: When the IR camera is used, this function can suppresses saturation of
the picture that happens in the short distance from object and you can set area up
that you want.
6. SMART 3DNR
This function reduces the background noise in a low luminance environment.
It will operate 3D DNR mode before happening motion, but if there is motion, it will
change to smart 3D DNR mode.
▶
ON:
Activates 3DNR so that noise is reduced. Set the 3DNR mode to ‘'ON’' and
press the SET button. Then you can adjust the noise reduction level.
▶
OFF: Deactivates 3DNR. Noise is not reduced.
VALUE: adjust 3 DNR level
SMART NR: if you want to use SMART 3D DNR,
select ON mode.
SMART LEVEL: adjust SMART 3D DNR level
SENSIVITY: adjust sensitivity level
7. F-DNR (Defog)
This camera supports DEFOG function which does a process of clearing blurred
image caused by fog and snow by analyzing the brightness of input image and
compensating the color of the image
▶ OFF: Deactivates F-DNR.
▶ F-DNR MANUAL
This function is operated manually
LEVEL: Select level
▶ F-DNR AUTO
This function is operated automatically.
LEVEL: select level
SMART 3DNR
1. VALUE IIIIIIIIII 0~200
2. SMART NR ON
3. SMART LEVEL IIIIIIII 0~200
4. SENSITIVITY IIIIIIIII 0~100
RETURN RET↙
F-DNR MANUAL
1. LEVEL IIIIIIIIIIIII1~ 5
2. DUMMY IIIIIIIIIIIII1~ 10
3. DUMMY IIIIIIIIIIIII1~ 10
4 GAMMA 0.1~1
5. RETURN RET↙
F-DNR AUTO
1. LEVEL IIIIIIIIIIIII 1~5
2. RETURN RET↙