D-MAX DCC-500D Manual - page 11
11
SHUTTER: Select shutter speed.
The default value is AUTO.
▶ AUTO, FLK, MANUAL, 1/50
AGC (Auto Gain Control)
▶ LOW / MIDDLE / HIGH
SENS-UP (Digital slow shutter)
▶
OFF
/
AUTO (x2~x256)
3. BACK LIGHT
This function is used to view a picture more clearly under back light condition.
▶ BLC
Enable a user to directly select a desired area from a picture, and to view the area
more clearly.
VALUE: Select BLC value.
•
LOW / MIDDLE /HIGH
AREA: Select area and then adjust size and
position of the area.
DEFAULT: Initialize all data you set.
▶ DWDR
When there are both bright and dark areas at the same time, this mode makes both
areas distinctive.
LOW LEVEL: Set lower level (0~15)
HIGH LEVEL: Set High level (0~15)
▶ HSBLC
GAIN: select gain value.
MODE: select between night only mode and all
day mode
MASK LEVEL: select mask level.
DEFAULT: Initialize all data you set.
M.SKIP AREA: set exception area where HSBL
MASK doesn
’t work.
4. WHITE BALANCE
The screen color can be adjusted by using the WHITE BALANCE function.
▶ ATW: Select this when the color temperature is between 2,000°K and 9,000°K
▶ AWB: this mode doesn
’t have the color temperature range.
EXPOSURE
▶SHUTTER AUTO
AGC HIGH
SENSE-UP ON↙
RETURN RET↙
BLC
▶1. VALUE MIDDLE
2. AREA SINGLE↙
3. DEFAULT ↙
4. RETURN RET↙
DWDR
▶1. LOW LEVEL IIIIIIIIII 0~15
2. HIGH LEVEL IIIIIIIIIII 0~15
3. RETURN RET↙
HSBLC
▶1. GAIN IIIIIIIIIII 1~100
2. MODE NIGHT ONLY
3. MASK LEVEL IIIIIIIIII 1~100
4. DEFAULT ↙
5. M. SKIP AREA OFF
6. RETURN RET↙