D-MAX DCC-500D User Manual - page 14
SHARPNESS
The outline of the video image becomes
cleaner and more distinctive as the level of
SHARPNESS increases. If the level goes
up excessively, however, it may affect the
video image and generate noise.
- The available range of level is 0 ~ 31.
RESET : Returns to the level which was set by the manufacturer
for shipment.
RETURN : Saves the SPECIAL menu and returns to the SETUP
menu.
9) EXIT
Saves all the setting menus and then exits.
24
25
SPECIAL
CAMERA ID
OFF
COLOR
ON
SYNC
INT
MOTION DET
OFF
PRIVACY
OFF
MIRROR
OFF
SHARPNESS
ON
RESET
RETURN
SHARPNESS
LEVEL
15
Press Set to Return
5. Troubleshooting
Problems
Troubleshooting
Please check the power connection.
Please check the video signal line connection.
Please check and make sure that the auto lens switch
is set to DC (VIDEO) when using a VIDEO(DC) lens.
Please check if the lens is clean.
Please clean the lens with a clean cloth or brush.
Please adjust the contrast feature of the monitor.
Please readjust the back focus of the camera.
Please adjust the contrast feature of the monitor.
If you have an intermediate device, set the 75 / Hi-z
properly, and check the terminals.
Please check if an auto iris lens is being used and
adjust the brightness level.
Please check if an appropriate power source to the
camera complies with the manufacturer's standard
requirement, or if the voltage keeps changing.
If there are problems in operation, please refer to the items below. If the
problem persists, please contact the agent you purchased this product from.
Nothing appears on the
screen.
The video image is not
clear.
The screen is dark.
There is a problem with
the camera operation.