D-MAX DMS-200 User Manual - page 16
4. AGC CONTROL
AGC(Automatic Gain Control)- It adjusts the
amount of video amplification to maintain a full 1-
volt peak-to-peak video signal output automatically.
▶
Low, Medium, Max
5. SHUTTER SPEED
As a setting shutter speed mode, it can be
distinguished a fast moving subject easily by
means of shutter speed up.
※
Attention-The illumination of the camera
decreases if shutter speed is up.
※
The state of first default is ‘AUTO’.
※
It can be worked in the state of Flickerless ‘off’
▶
Range : Auto, 1/125, 1/250, 1/500, ---
1/120000
6. SHARPNESS LEVEL
Compensation of the shape of a subject
▶
Range : 0 ~ 10, Default : 6
7. BRIGHTNESS
Control brightness of a screen.
The screen gets dark because an iris is closed as
the numerical value is low, whereas the screen
gets bright because an iris
is opened as the numerical value is high.
▶
Range: 0~19, Default: 9
◄◄ CAMERA SETUP p1 ►►
1. ID Set :
Press F/F Key
2. OSD Display. : ID + Status
3. H-V Reverse. : Normal
4. AGC Control : Medium
5. Shutter speed. : AUTO
6. Sharpness level : 06
7. Brightness : 09
8. Flickerless : OFF
9. DNR Control : Medium
- NEXT MENU PAGE
◄◄ CAMERA SETUP p1 ►►
1. ID Set :
Press F/F Key
2. OSD Display. : ID + Status
3. H-V Reverse. : Normal
4. AGC Control : Medium
5. Shutter speed. : AUTO
6. Sharpness level : 06
7. Brightness : 09
8. Flickerless : OFF
9. DNR Control : Medium
- NEXT MENU PAGE
◄◄ CAMERA SETUP p1 ►►
1. ID Set :
Press F/F Key
2. OSD Display. : ID + Status
3. H-V Reverse. : Normal
4. AGC Control : Medium
5. Shutter speed. : AUTO
6. Sharpness level : 06
7. Brightness : 09
8. Flickerless : OFF
9. DNR Control : Medium
- NEXT MENU PAGE
◄◄ CAMERA SETUP p1 ►►
1. ID Set :
Press F/F Key
2. OSD Display. : ID + Status
3. H-V Reverse. : Normal
4. AGC Control : Medium
5. Shutter speed. : AUTO
6. Sharpness level : 06
7. Brightness : 09
8. Flickerless : OFF
9. DNR Control : Medium
- NEXT MENU PAGE