D-MAX DMS-200 User Manual - page 23
⑤
Tour SET Group: User can set continual Group motion that can be put 12 Groups in 1 Tour
Move to the setting page if user presses F/F key on this menu
■ The Group user wants to set must be set firstly
※
Setting is only possible when Preset is set first in the state of setting of Swing, Group, Tour,
otherwise, it displays the message “Sorry Undefined”.
⑥
Run Function: Operate one of SWING/ *Set / Stop order with a control keyboard without
menu GROUP / TOUR / TRACE. (It is operated on the screen. automatically after end of OSD
menu)
■ User can look at how to set TRACE at TRACE SET PAGE”
⑦
RETURN MENU PAGE: Move to a higher menu page when control the joystick Right/Left in
the selection of this menu.
21. TRACE SET PAGE
Set TRACE.
User can regenerate and save a change of the
unrestricted location of ZOOM In/Out and a
position of the camera by hand-worked control with
a joystick.
User can see the screen when moves the joystick
to Right/Left after fixing the cursor on the menu
■ How to set TRACE
Press F/N button to select “SET” mode → move
camera by using joystick toward position you want
up to for 180/sec → after finishing all work, move
cursor to save mode → press F/N button
- DELETE
All saved position will be deleted completely.
◄◄ CAMERA SETUP p3►►
18. Select Alarm : Sensor
19. Motion Detection : Off
20. Preset Set & Run Page
21.Trace Set Page
22. Alarm CH On/Off Page
23. Alarm Preset Set Page
24. Privacy Zone Set Page
- PREV MENU PAGE
- NEXT MENU PAGE