D-MAX DMS-200 User Manual - page 18
11. SET BACK LIGHT MODE
▶ WDR
MODE
- Limit: Adjust the WDR Sensitivity by selecting
Low or Max
- Level: Adjust the WDR Brightness by controlling
0~15.
▶
HLC(High Light Compensation)MODE
- Limit: Adjust the HLC Sensitivity by selecting Low,
Medium or Max
- Level: Adjust the WDR Brightness by controlling 0~15.
- This Function only operate in nighttime.
▶
BLC MODE :
Select BLC mode or BLC Set area mode by using the joystick.
- BLC Level: Adjust the BLC Sensitivity by selecting Low, Medium or Max
- BLC Set AREA (Press F/F): Set BLC area location and size
- Select F/F button, and set the BLC area by using the joystick, and set are size by using Z/I,
Z/O buttons. (The monitor shows as Exit BLC set(Press F/N)
After complete all setup, press F/N button, and then move to RETURN MENU PAGE. It is
automatically saved.
12. WHITE BALANCE
It prevents from that white color is changed as
illumination.
▶
Auto, Indoor, Outdoor
13. FOCUS MODE
Change Focus Mode to hand-worked or auto.
▶
OneShot : Auto Focusing mode works during
non-working
after zoom is worked.
▶
Auto: It adjusts the focus automatically as it
monitors the screen.
▶
Manual: User can control the focus by hand-
worked.
◄◄ CAMERA SETUP p2 ►►
10. Back Light : WDR Mode
11. Set Back Light Mode
12. White Balance : Auto
13. Focus Mode :Oneshot
14. Zoom Max Limit : Off
15. DSS Control : 10 Field
16. Day&Night : Auto+Low
17. Stabilize On/Off : Off
- PREV MENU PAGE
- NEXT MENU PAGE
◄◄ CAMERA SETUP p2 ►►
10. Back Light : WDR Mode
11. Set Back Light Mode
12. White Balance : Auto
13. Focus Mode :Oneshot
14. Zoom Max Limit : Off
15. DSS Control : 10 Field
16. Day&Night : Auto+Low
17. Stabilize On/Off : Off
- PREV MENU PAGE
- NEXT MENU PAGE
◄◄ CAMERA SETUP p2 ►►
10. Back Light : WDR Mode
11. Set Back Light Mode
12. White Balance : Auto
13. Focus Mode :Oneshot
14. Zoom Max Limit : Off
15. DSS Control : 10 Field
16. Day&Night : Auto+Low
17. Stabilize On/Off : Off
- PREV MENU PAGE
- NEXT MENU PAGE