Dacor Epicure EGR30 Installation Instructions Manual - Esign
d
esign
s
peCifiCaTions
p
RoduCT
d
imensions
Rear Wall
8 3/8”
(213mm)
24"
(610mm)
30 1/16" (764mm)
All Dimensions are from
Cabinet Only
(Not Countertop)
Floor
2 3/16”
(56mm)
3 7/8" (98mm)
1 1/2" (38mm)
Installation of ERD30 Anti-Tip Bracket
Top View
Back wall
7 1/2"
(191mm)
4 13/16" (122mm)
24" (610mm)
36 1/16"
(916mm)
18 1/32"
(458mm)
All Dimensions are
from Cabinet Only
(Not Countertop)
Installation of ERD36 Anti-Tip Bracket
Top View
Left
Rear
Leg
Leveler
5/16 - 18 x 2
or Equivalent
Rear
Location of ERD30 Anti-Tip Leveler
Left
Rear
Leg
Leveler
5/16 - 18 x 2
or Equivalent
Rear
Location of ERD36 Anti-Tip Leveler
ERD36, ERDE36, ERD48 & ERDE48 Overall Dimensions
Side View
29 1/8" (740mm)
28 1/8" (714mm)
30 3/8" (772mm)
1 9/16"
(40mm)
35 1/2” - 38 5/8”
(902mm - 981mm)
Finished Side
Panel
26 1/2" (673mm)
Rear of Control Panel/Oven Door
Face of Control Panel/Oven Door
Front Edge of Bullnose
Handle
9"
(229mm)
3"
(79mm)
15 1/4"
(387mm)
24"(610mm)
Backguard
9" (229mm)
Backguard
3" (76mm)
Backguard
19"
(483mm)
ERD/EGR30, ERD60 Overall Dimensions
Side View
27" (686mm)
26" (660mm)
28 1/2" (724mm)
37”
(940mm)
to
35 3/4"
(908mm)
Finished Side Panel
24 3/8" (619mm)
Rear of Control Panel/Oven Door
Face of Control Panel/Oven Door
Front Edge of Bullnose
Handle
6” (152mm) Backguard
When Backguard and
Side Panels are
removed, the overall
depth decreases
by 1" (25mm)
Accessory 3” (76mm) Side Panels
(Dacor Model No. AESP03)
1 9/16"
(40mm)
NOTE:
For ERD all front-to-back depth dimensions are
reduced by 1” (25mm) when Backguard and full side
panels are removed.
NOTE:
For Backguard Installation (36” and 48” models) see
page 6. Always install backguard before installation
of the range.
Installing the Anti-Tip Bracket (30” & 36” Models Only)
The 30” and 36” ranges require an anti-tip device.
Before installing the range, you must locate and
secure the anti-tip bracket to the floor.
WARNING