Dacor REMP16 Installation Instructions Manual - page 4
2
Important Safety Instructions
Do not install or operate this unit if it has been dam-
•
aged, dropped, has damaged electrical wiring or
is not working properly. If the product is damaged
when received, immediately contact the dealer or
builder.
Install or locate this appliance only in accordance
•
with these installation instructions and the Dacor
hood or downdraft vent installation instructions.
Improper installation, adjustment, alteration, service
or maintenance can cause serious personal injury or
property damage.
Before installing or servicing the in-line blower,
•
make sure that power to the wiring is turned off at
the circuit breaker or fuse box. Make sure that the
service panel is locked or tagged to prevent power
from being switched on accidently.
To reduce the risk of electric shock or fire, the total
•
combined current draw of the in-line blower and the
hood or downdraft vent must not exceed the maxi-
mum rated input current of the hood or downdraft
vent.
The installer must show the customer the location
•
of the fuse or circuit breaker panel so that the cus-
tomer knows where and how to turn the power off.
WARNING
General Safety Precautions
To reduce the risk of fire, electric shock, serious injury or death when using this blower, follow basic safety precautions,
including the following:
A minimum of two people are required to safely
•
install this appliance.
Never allow the filters or vent openings on the hood
•
or downdraft vent to become blocked or clogged.
Do not allow foreign objects, such as cigarettes or
napkins, to be sucked into the vent holes.
Tape all duct joints securely to prevent combus-
•
tion by-products, smoke or odors from entering the
home. Doing so will also improve system efficiency.
Do not route electrical wiring near hot surfaces.
•
Do not ground the appliance with the neutral (white)
•
house supply wire. A separate ground wire must be
utilized.
To prevent a damaged or non-functional system,
•
complete electrical connections properly. Follow
the wiring diagrams carefully in the hood or in-line
blower installation instructions to ensure a proper
installation. After installation or service, make sure
that all blower wires are tightly connected to their
respective terminals.
WARNING