Daewoo Video recorder Instruction Manual - page 20
20
Normal timer recording
◆
For timer recordings, clock, date, and stations must be set correctly.
◆
Load a cassette with its safety tab in place (see page 23) and with enough free tape for the recording.
2
3
3
1
4
5
6
7
8
9
0
0
TV/VCR
AV
QS
A.D
EJECT
MENU
SP/LP
PR
+
OK
A.SEL
PR
–
INDEX
–
+
SV/V+
PAL/SEC
1
Press MENU.
Choose "Timer Program" by
pressing OK.
Press PR+ or PR- to select an
unused channel, for example ‘- - - -’
then press OK to confirm.
There are positions for eight timer
programs.
Press PR+ or PR- to select how
often you want to make the
recording, for example, once, weekly
and so on. Press OK to confirm.
2
3
PR+/-:select (AV1/AV2)
0-9 :setup(PR)
/ :correct MENU:end
PR
--
Start Time
--:--
End Time
--:--
Start Date
--/--
Tape Speed SP
PDC
OFF
TIMER PROGRAM (Once)
PR
03
Start Time
21:20
End Time
22:20
Start Date
20/09(MON)
Tape Speed LP
PDC
OFF
/ :correct
OK:confirm MENU:end
TIMER PROGRAM (Once)
How often do you want
to record this program?
PR+/-:select
OK:confirm MENU:end
Once
Weekly(Once a Week)
Daily(Mon-Fri)
Daily(Mon-Sat)
Daily(Mon-Sun)
TMR
◆
PR : Use PR+ if you want to choose
the AV channel or 0 to 9 for other
channels.
◆
Start time : Use buttons 0 to 9 to
enter the start time.
◆
End time : Use buttons 0 to 9 to enter
the end time.
◆
Start date : Use buttons 0 to 9 to
enter the date.
◆
Tape Speed : Use PR+ if you want to
choose LP (see page 18).
◆
PDC : Use PR+ if you want to switch
PDC on (see page 19).
If PDC does
not appear on the screen, it is not
available on your video.
If you want to change any of the
details. Move to the details you
want to change using the and
buttons.
Change the setting using the PR+ or
PR- or number buttons 0 to 9.
4
5
If all the settings are correct, press until you
see ‘OK:confirm’ on the bottom line of the screen.
Press OK to confirm.
Switch your video off by pressing
the
button.
These buttons are used
on the following two
pages.
You can switch your video on again if you want to set the timer to record another programme. Remember to switch the
video off when you have finished.
•
The video will warn you if you have set the timer to start recording a second programme before the first
programme has finished. If you don’t adjust the times, the video will record the first programme completely,
then start to record the second one.
•
If there is not enough free space for the recording on the cassette the video will automatically switch to
‘LP’ to double the recording time left on the cassette.
•
The recorder will eject cassettes which have the safety tab removed (page23)
•
To stop a recording which has already started, press and hold the STOP button for about five seconds until
the video stops recording.