E.C.A. Proteus Plus Blue 24 kW Installation And Operating Instructions Manual - page 5
• The general maintenance of your device should be perfarmed each year by the beginning of the
season. Have the maintenance operations perfarmed by E.C.A. authorized services.
• The cleaning of exterior surfaces of the device should be perfarmed just by a damp cloth without
using detergent or any chemicals. The use of detergent ete. chemicals may cause corrosion and
scratches on your device.
PRODUCT
General Features
E.C.A. Proteus Plus Blue 24 kW hermetic combi boilers is far central heating and domestic hat
water usage. Proteus Plus Blue hermetic combi boilers may operate with natural gas or LPG.
it enables saving of place by its design that provides ease of service and maintenance and by its
size of 720x400x330. it has a delicate appearance with its round lines and design.
lts control panel has been designed in an ergonomic structure. lts operation functions, central
heating circuit and running water temperatures, malfunction status, setting values, water pressure
infarmation and current values may be seen over the LCD.
The operation functions and security of the device is ensured over a single center, the 'main
board'. The main board controls the gas valve, fan, circulation pump and 3 way valve. Whether
there exists flame in burner may be monitored from the sightglass on the front panel or from the
LCD display.
.&.
CAUTION:
Directly contacting the surrounding of sightglass during monitoring of
flame modulation is undesirable against the danger of burning.
The burner has been built from stainless steel material that is resistant to temperature and thermal
stress. it operated silent with its special design, and it ensures an efficient and clean combustion as the
result of homogenous distribution of gas. in accordance with the burner, a combustion chamber with
perfect isolation enabling high efficiency and low gas emission with minimum heat loss has been
designed. Due to these features of the burner and combustion chamber, fuel saving is ensured, and
alsa minimum noise level is obtained.
The circulation pump has automatic air relief cock and three cycles, and it is suitable far ali the
installations. The device has 'pump over-run' feature that prevents thermal accumulation in the
installation. After ending of central heating and/or domestic hat water requirement, the circulation
pump continues to operate far a specific period by this feature.
High efficiency is obtained by durable copper exchanger that has been designed to prevent thermal
shock. Moreover, there is a separate exchanger with steel plate within the device in order to
obtain comfartable and efficient domestic hat water.
By the safety systems on your device, the full safety of your device and you has been ensured. These
safety systems;
• Funnel Safety
• Flame Out Safety
• Excessive Temperature Safety (105
°
()
• Running Water Excessive Heating Safety (71
°
C)
• Central Heating Circuit Water Excessive Heating Safety(95
°
C)
• High Water Pressure Safety (3 bar)
• Low Water Pressure Safety (0.8 bar)
• Low Voltage Safety (130VAC)
• Hat Water Accumulation Safety (additional operation of by-pass circuit and pump)
• Freeze Safety (the electrical connection of the device shouldn't be cut far the operation of freeze safety)
• Pump Jamming Safety
• 3 Way Valve Jamming Safety
• Automatic Air Relief Cock
• Expansion Tank
3