E-Mu MP-7 command station Operation Manual Addendum - page 15
XL-7 / MP-7 Manual Addendum 15
XL-7 / MP-7 Operation Manual Addendum
To Insert a new Event:
1) Press the Repeat button.
2) Modify the Time & Tempo.
8.
If you want to add another tempo change, press the Repeat button on
the front panel.
9.
Change the Time Location and Tempo.
10.
Press the Pattern Edit button to exit the Pattern Edit module.
To Remove or edit a Tempo Change from the Conductor Track:
1.
Select the pattern you wish to edit.
2.
Press the Pattern Edit button.
3.
Press the (-) Track/Channel buttonuntil “CT” appears in the track
field.
4.
Press the Enter button as prompted by the display to begin editing.
5.
Press the right Cursor button twice to move the cursor underneath the
Event Scroll field (<->).
6.
Turn the data entry control to scroll through the event list and locate
the tempo change you want to edit.
7.
Press the front panel Erase button to erase the tempo event.
8.
Simply change the Tempo or Location fields to modify the tempo or
time of the event.
9.
Press the Pattern Edit button to exit the Pattern Edit module.
To Insert or Edit Meter Changes:
Meter changes are inserted and edited exactly like tempo changes.
Revert to Saved
Pattern
This screen allows you to discard any edits made to the pattern and restore
the last saved version. This is not the same as an “Undo” function since
Revert permanently discards any edits you have made since saving. This
function removes the asterisk in the display that appears after you’ve edited
the pattern.
_
_
_
_
Caution: Never “Revert
to Saved” while the sequencer is
in record mode or the computer
may crash.
T
CT EVENT <->
002.03.008
tempo: 120 bpm
Event Scroll Field
(scroll though events)
REVERT TO SAVED PATTERN
000
0
A2DJ