E-Mu MP-7 command station Operation Manual Addendum - page 4
4
E-MU Systems
XL-7 / MP-7 Operation Manual Addendum
Note Range Option
You can now specify a note range when performing the following Song or
Pattern editing functions: Scale/Shift Duration, Thin Events, Transpose and
Scale/Shift Velocity. This gives you much more control over which notes
are edited. See the “Set/Shift Duration” function below for a detailed
description.
Scale/Shift
Duration
This filter allows you to either scale (multiply by a value) or shift (add a
value to) the note durations in the selected tracks. The Scale function is
performed before the Shift value is added.
Scale
- Multiplies all note durations by a percentage from 0% to 125%.
Scaling by 100% would leave all note durations untouched.
Scaling by 50% would cut all note durations in half.
Shift
- Adds or subtracts a specific note duration in quarter notes and
ticks
to note-on events in the selected tracks.
To Scale or Shift Note Duration:
1.
Select the pattern
you wish to edit.
2.
Select the
Track(s)
you wish to Scale or Shift using the Track Enable/
Mute buttons.
3.
Press the
Pattern Edit
button.
4.
Scroll to the
Scale/Shift Note Duration
screen shown below using the
data entry control.
O
O
O
O
Tip:
To set all notes to a
particular value, set Scale to 0%,
(this zeros the value) then set
Shift to the desired duration.
5.
Select the
amount of note duration scaling or shift (offset)
. The
Home/Enter LED will be flashing once the cursor is moved to the lower
line of the display.
6.
Press
Enter.
The screen shown below appears to remind you to select
the tracks you want to filter. Select a key range for filtering. The default
setting is all keys.
7.
Press
Enter
to scale/shift the note durations. Press any other menu
button to
Cancel
the operation.
SCALE/SHIFT NOTE DURATION
Scale: 87% Shift:
+00.000
Quarter Notes
Ticks
SELECT TRACKS
Key Range: C-2 to:G8
Low Key
High Key